Proxxon 12 Volt Power Tools


Proxxon Tools >  Proxxon 12 Volt Power Tools



Proxxon AP 12 Universal Oil Pump 12V DC 474928  (Ref: 25262)

Proxxon AP 12 Universal Oil Pump 12V DC 474928

* Perform an oil change in just 2-3 minutes
* Pumps, motor, diesel and heating oil effortlessly
* 250litres an hour (fitted with a 1/2" feed hose)
* Pumps the oil out of an engine via the dipstick shaft
* Includes a 6mm diameter dip wand
* Crocodile clips fitted suitable for connection to a car battery
* 130 x 90 x 90mm, weight 1.4kg


This small neat unit is will help you perform an oil change in just 2-3 minutes.This pump transfers, motor, diesel and heating oil effortlessly at a rate of 250 litres an hour (fitted with a 1/2" feed hose). You can pump the oil out of an engine via the dipstick shaft in which case the flow rate is 3 litres per minute at 40°C oil temperature. The unit includes a 6mm diameter by 800mm long dip wand for this purpose. The crocodile clips fitted to the 12 Volt DC feed cables are suitable for connection to a car’s battery. The feed and supply sides have 1/2" connectors. An outlet hose of approximately 1,500mm is also included. The housing is made of glass fibre reinforced polyamide; approx 130 x 90 x 90mm.

46.91 56.29


Quantity:  





Proxxon PS 13 Pensander 12V 475318  (Ref: 28594)

Proxxon PS 13 Pensander 12V 475318

The PS 13 Pensander from Proxxon is a great tool for the model maker and miniaturist. It is ideal for working on surfaces in recesses, slots and other awkward to get at areas. The durable special DC motor is housed in a glass fibre reinforced polyamide casing and the unit features a sanding stroke with a linear action, not rotational. Supplied with four sanding arbors with straight shanks and four angled (all different shapes) as well as three sheets of pre-profiled self adhesive sanding pads. The sheets are of grits 180, 240 and 400 with 5 of each shape per sheet.N.B. A mains adaptor of at least 1.0A at 10-18VDC is required. We recommend Proxxon power supplies NG2/E or NG5/E.

21.38 25.66


Quantity:  


Related products:
1. Proxxon Sanding Sheets for PS 13 Pensander 180 Grit 477426 (Ref: 28822)
2. Proxxon Sanding Sheets for PS 13 Pensander 240 Grit 477427 (Ref: 28824)
3. Proxxon Sanding Sheets for PS 13 Pensander 400 Grit 477428 (Ref: 28826)
4. Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V 475738 (Ref: 28707)
5. Proxxon MICROMOT NG 5/E Mains Adaptor 474952 (Ref: 28704)





Proxxon Sanding Sheets for PS 13 Pensander 180 Grit 477426  (Ref: 28822)

Proxxon Sanding Sheets for PS 13 Pensander 180 Grit 477426

Key Features

3 silicon carbide, self-adhesive sheets
20 pads in different shapes

5.04 6.05


Quantity:  





Proxxon Sanding Sheets for PS 13 Pensander 240 Grit 477427  (Ref: 28824)

Proxxon Sanding Sheets for PS 13 Pensander 240 Grit 477427

Key Features

3 silicon carbide, self-adhesive sheets
20 pads in different shapes

5.04 6.05


Quantity:  





Proxxon Sanding Sheets for PS 13 Pensander 400 Grit 477428  (Ref: 28826)

Proxxon Sanding Sheets for PS 13 Pensander 400 Grit 477428

Key Features

3 silicon carbide, self-adhesive sheets
20 pads in different shapes

5.04 6.05


Quantity:  





Proxxon THERMOCUT 12/E Hot Wire Cutting Device 12V 211076  (Ref: 27082)

Proxxon THERMOCUT 12/E Hot Wire Cutting Device 12V 211076

* Cutting wires (200 x 0.85mm) can be deformed for the manufacture of any profile by hand or pliers
* Pivoted fixing element at top
* Extendable wire fixing for maximum extension of 200mm.
* Cutting temperature infinitely variable
* Polarity-protected system plug


For free modelling in styrofoam. For the manufacture of any profile.For free cutting in thick styrofoam panels for Diorama model railway construction. For architectural model building, prototype construction, for designers and decorators. For fine work on construction insulation. And of course for classical model building. No "crumbling" as when working with knife and sandpaper! Stable frame with pivoted fixing element and extendable lower wire fixing. This means a maximum extension of 200mm. Workpiece height 150mm. Cutting wire temperature infinitely variable: With a little practice, you can achieve optimum cuts depending on the material density and thickness. This is mostly possible at medium temperatures and without too much pressure. Heat-up time 1 second! Complete with five deformable cutting wires 200 x 0.85mm.Technical data: 12V. 60W. 50/60Hz. Cutting wire temperature is variable between 150° and 350°. Note: Styrofoam is an inexpensive material, and extremely environmentally friendly compared with all other materials. Styrofoam can be purchased in specialist shops and DIY centre

This product is 12 V so will require a transformer

30.76 36.91


Quantity:  


Related products:
1. Proxxon MICROMOT NG 5/E Mains Adaptor 474952 (Ref: 28704)
2. Proxxon MICROMOT NG 2/S Single Speed Mains Adaptor 12V 476059 (Ref: 28706)
3. Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V 475738 (Ref: 28707)





Replacement cutting wire For the THERMOCUT 12/E 28080  (Ref: 702059)

Replacement cutting wire For the THERMOCUT 12/E   28080

Replacement cutting wire for the THERMOCUT 12/E. Easy to bend, therefore ideal for modelling. 10 pieces

6.53 7.84


Quantity:  





Proxxon FBS 12/E Precision Drill/Grinder 12V 475142  (Ref: 28462)

Proxxon FBS 12/E Precision Drill/Grinder 12V 475142

* Precision tool for delicate or small jobs
* Keyless chuck (capacity 0.3 - 3.2 mm)
* Spindle lock for easy bit changing
* Recessed spindle head for inserting: MlCROMOT collets
* High quality 12 - 18V, 5 pole motor
* Fibreglass reinforced POLYAMIDE casing
* For use with MICROMOT transformers of at least 2.0A


A great precision tool for delicate or small jobs which you can't do with a standard drill: e.g. precision drilling, milling, sanding, polishing, brushing, de-rusting, engraving and cutting. Includes keyless chuck (capacity 0.3 - 3.2 mm). A precision ball bearing minimises spindle side play. Spindle lock button for bit changing obviates the need for spanners. Recessed spindle head for inserting: MlCROMOT steel collets. Efficient forced ventilation cooling of motor (and electronic components in "E" model). High quality 12 - 18 Volt, 5 pole motor with variable speed 3,000 to 15,000rpm. Fibreglass reinforced POLYAMIDE casing. For use with MICROMOT transformers of at least 2.0A.

33.59 40.31


Quantity:  


Related products:
1. Proxxon MICROMOT NG 5/E Mains Adaptor 474952 (Ref: 28704)
2. Proxxon MICROMOT NG 2/S Single Speed Mains Adaptor 12V 476059 (Ref: 28706)
3. Proxxon 13 Piece Modeller's Set 476855 (Ref: 28910)
4. Proxxon 9 Piece Electronic Technician Set (Ref: 28930)
5. Proxxon End Wire Brush - Brass 8mm (Pkt 2) 202355 (Ref: 28961)
6. Proxxon Wire Wheel Brush - Brass 22 mm (Pkt 5) 202356 (Ref: 28962)
7. Proxxon Wire Wheel Brush - Steel 22 mm (Pkt 5) 202353 (Ref: 28952)
8. Proxxon Diamond Coated Cutting Disc (Diamond-coated cutting discs with cooling holes) 950540 (Ref: 28844)
9. Proxxon Spring Steel Cutting Blades (Ref: 28830)





Proxxon GG 12 Engraving Tool  (Ref: 476217)

Proxxon GG 12 Engraving Tool

Key Features

Requires Proxxon mains adaptor 12 - 18V
20,000rpm spindle speed
Supplied with a 1.8mm diamond grinding bit with spherical head

The GG 12 engraving tool requires a Proxxon mains adaptor 12 - 18V. It features a 20,000 rpm spindle speed, fitted with ball bearing. It is supplied with a 1.8mm diamond grinding bits with spherical head for engraving & line work.

12.14 14.57


Quantity:  





Proxxon Engraving Kit & 4 Piece Glass Working Set - PACKAGE DEAL  (Ref: 717738)

Proxxon Engraving Kit & 4 Piece Glass Working Set - PACKAGE DEAL

Key Features

Proxxon Complete Engraving Kit with Tester Glass

Tester glass supplied with engraving tool GG 12
12 - 18V, 20,000rpm spindle speed, fitted with ball bearing
TUV approved mains adapter (12V, 0.5A), motifs and instruction booklet
Bits 1.0 & 1.8mm diamond grinding bits with spherical head for engraving & line work
Silicon carbide grinding bits in both conical and bullet shape for frosting glass as well as carborundum grinding bits in ball and cylinder shape for grinding and engraving
Proxxon 4 Piece Glass Working Set

Four piece set
2 Diamond grinding bits (1 & 1.8mm dia)
2 Silicon carbide bits (cone 3.2 x 5mm & cylinder 2.25 x 7mm)
All shafts 2.35mm
For engraving, grinding and frosting glass

This package comprises the Proxxon Complete Engraving Kit with Tester Glass and the Proxxon 4 Piece Glass Working Set.

Proxxon Complete Engraving Kit with Tester GlassSupplied with a tester glass so you can start engraving immediately. GG 12 engraving tool, 12-18V, 20,000 rpm spindle speed, fitted with ball bearing. TUV approved mains adaptor (12 V, 0.5 A), motifs and instruction booklet. 1.0 and 1.8mm diamond grinding bits with spherical head for engraving and line work. Silicon carbide grinding bits in both conical and bullet shape for frosting glass as well as carborundum grinding bits in ball and cylinder shape for grinding and engraving.

Proxxon 4 Piece Glass Working SetFour piece set consisting of two diamond grinding bits (one and 1.8mm diameter) and two silicon carbide bits, cone 3.2 x 5mm and cylinder 2.25 x 7mm. All shafts 2.35mm. For engraving, grinding and frosting glass.

31.63 37.96


Quantity:  





Proxxon Complete Engraving Kit with Tester Glass 475175  (Ref: 28635)

Proxxon Complete Engraving Kit with Tester Glass 475175

Supplied with a tester glass so you can start engraving immediately. GG 12 engraving tool, 12 - 18V, 20,000 rpm spindle speed, fitted with ball bearing. TUV approved mains adapter (12 V, 0.5 A), motifs and instruction booklet. Bits 1.0 & 1.8mm diamond grinding bits with spherical head for engraving & line work. Silicon carbide grinding bits in both conical and bullet shape for frosting glass as well as carborundum grinding bits in ball and cylinder shape for grinding and engraving.

34.80 41.76


Quantity:  


Related products:
1. Proxxon 4 Piece Glass Working Set 477429 (Ref: 28920)





Proxxon STS 12/E Jigsaw 12V 475014  (Ref: 28534)

Proxxon STS 12/E Jigsaw 12V  475014

Ideal for curved cuts in wood (up to 10mm), corrugated boards (up to 3mm) and non-ferrous metals (up to 2.5mm). Equipped with a powerful 12 - 18 Volt five-pole motor. Power consumption 100W, max. 6mm stroke. The number of strokes may be adjusted between 2,000 and 5,000 per minute. Stable housing of fibreglass reinforced POLYAMIDE. Includes two saw blades (coarse and fine). We recommend MICROMOT mains adaptor from 2.0A for powering the jigsaw.

* Powerful 5-pole motor operates
* 6mm stroke
* Variable speed 2,000 to 5,000/min.
* Supplied with two blades 1 coarse & 1 fine.
* Requires a MICROMOT adaptor of a least 2.0 A

39.97 47.96


Quantity:  


Related products:
1. Proxxon MICROMOT NG 5/E Mains Adaptor 474952 (Ref: 28704)
2. Proxxon Supercut Jigsaw Blades (Pack of 2) 477733 (Ref: 28054)
3. Proxxon HSS Jigsaw Blades (Pack of 2) 47762 (Ref: 28056)
4. Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V 475738 (Ref: 28707)





Proxxon MICROMOT 50 Drill/Grinder 12V 475455  (Ref: 28500)

Proxxon MICROMOT 50 Drill/Grinder 12V 475455

A single speed machine 20,000rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds. Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm are supplied. Power consumption is 40W, max. length 220mm and weight approx. 230g. The body diameter of only 35 mm makes it easy to handle. The weight of 230g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12V drive system, use of a transformer is required. 12V MICROMOT transformers of at least 1A are recommended.

* Slim, easily handled & light weight (230g)
* Quick-action chuck
* 20,000rpm
* Special balanced, low noise DC motor
* 12V MICROMOT transformers of at least 1A are recommended

24.55 29.46


Quantity:  


Related products:
1. Proxxon MICROMOT NG 5/E Mains Adaptor 474952 (Ref: 28704)
2. Proxxon MICROMOT NG 2/S Single Speed Mains Adaptor 12V 476059 (Ref: 28706)
3. Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V 475738 (Ref: 28707)
4. Proxxon Complete Polishing Set 476719 (Ref: 28285)
5. Proxxon 13 Piece Modeller's Set 476855 (Ref: 28910)
6. Proxxon High Speed Steel Cutters - Set of 5 202332 (Ref: 28710)
7. Proxxon Reinforced Aluminium Oxide Cutting Discs & Arbor - 22mm (Pkt 10) 202348 (Ref: 28808)
8. Proxxon Sanding Sheets for PS 13 Pensander 240 Grit 477427 (Ref: 28824)





Proxxon MICROMOT 50/E Drill/Grinder 12V 475317  (Ref: 28510)

Proxxon MICROMOT 50/E Drill/Grinder 12V 475317

The thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds. Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm are supplied. Power consumption is 40W, max. length 220mm and weight approx. 230g.The body diameter of only 35 mm makes it easy to handle. The weight of 230g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

* Slim, easily handled & light weight (230g)
* Quick-action chuck
* Variable speed with feedback
* Special balanced, low noise DC motor
* MICROMOT 12V transformers of at least 1A are recommended

28.33 34.00


Quantity:  


Related products:
1. Proxxon MICROMOT NG 5/E Mains Adaptor 474952 (Ref: 28704)
2. Proxxon MICROMOT NG 2/S Single Speed Mains Adaptor 12V 476059 (Ref: 28706)
3. Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V 475738 (Ref: 28707)
4. Proxxon 13 Piece Modeller's Set 476855 (Ref: 28910)
5. Proxxon Complete Polishing Set 476719 (Ref: 28285)
6. Proxxon Sanding Drums 120 grit - Packs 10 with Arbor 210503 (Ref: 28978)
7. Proxxon Wire Wheel Brush - Steel 22 mm (Pkt 5) 202353 (Ref: 28952)
8. Proxxon Spring Steel Cutting Blades (Ref: 28830)
9. Proxxon Reinforced Aluminium Oxide Cutting Discs & Arbor - 38mm (Pkt 5) 477258 (Ref: 28818)
10. Proxxon Diamond Coated Cutting Disc (Diamond-coated cutting discs with cooling holes) 950540 (Ref: 28844)





Proxxon MICROMOT 50/EF 12V Rotary Tool 12V 475368  (Ref: 28512)

Proxxon MICROMOT 50/EF 12V Rotary Tool 12V 475368

Slim, easily handled and light. Quick action chuck and electronic variable speed with feedback. Special balanced, low noise DC motor. Length 220m. N.B. 12V MICROMOT mains adaptor (476059), required to operate this tool.

Slim, easily handled & light weight (230g)
Quick-action chuck
Variable speed with feedback
Special balanced, low noise DC motor
Requires 12V MICROMOT mains adaptor 28706

26.72 32.06


Quantity:  


Related products:
1. Proxxon MICROMOT NG 2/S Single Speed Mains Adaptor 12V 476059 (Ref: 28706)
2. Proxxon 10 Piece HSS Twist Drill Set 477602 (Ref: 28874)
3. Proxxon 6 Piece HSS Twist Drill Set 476782 (Ref: 28876)
4. Proxxon High Speed Steel Cutters - Set of 3 202333 (Ref: 28720)
5. Proxxon Tungsten Carbide Milling Bits Straight (1mm) 477080 (Ref: 28758)
6. Proxxon Felt Polisher 22 mm Pack of 2 (Ref: 28299)
7. Proxxon Reinforced Aluminium Oxide Cutting Discs & Arbor - 38mm (Pkt 5) 477258 (Ref: 28818)
8. Proxxon Flap Sanding Wheel 120g - 30mm 202361 (Ref: 28985)
9. Proxxon Spring Steel Cutting Blades (Ref: 28830)
10. Proxxon End Wire Brush - Steel 8mm (Pkt 2) 202352 (Ref: 28951)





Proxxon MICROMOT NG 5/E Mains Adaptor 474952  (Ref: 28704)

Proxxon MICROMOT NG 5/E Mains Adaptor 474952

Variable speed control with feedback effect for optimum tool speed and high torque at low speeds. Three polarised sockets for Micromot machines. A pair of sockets for standard banana plugs (4mm diameter) is also supplied. Master switch for turning off the transformer without needing to unplug. Red LED indicates 'ready'. PTC (Positive-Temperature-Coefficient) element prevents overload (and plugged-in tool will not restart automatically). After cooling down, the mains plug should briefly be unplugged to reset the adaptor. With storage holes for tools with 2.35mm and 3mm shafts. Foldable tool rest for the Micromot tool.

DRILL NOT INCLUDED

Input Voltage: 240V
Model: NG 5/E
Output Voltage: 12V

52.96 63.55


Quantity:  





Proxxon MICROMOT NG 2/S Single Speed Mains Adaptor 12V 476059  (Ref: 28706)

Proxxon MICROMOT NG 2/S  Single Speed Mains Adaptor 12V 476059

The micromot mains adaptor NG2/S is a 240V to 12-18V / 2.0A unit suitable for many of the Proxxon machines. The NORYL casing is heat resistant, which is a necessity for transformer enclosures. The red LED indicates readiness for use and the PTC element (Positive temperature coefficient) prevents overload of the unit. A foldable tool rest provides a secure place for keeping the Micromot tools at the ready. Note: Supplies 2.0A at 16 Volt open circuit and 12 Volt under load.

DRILL NOT INCLUDED

Input Voltage 220 - 240V
Model NG 2/S
Nett Weight 1kg
Output Voltage 12 - 18V

The mains adapters do not include the illustrated mill/drill units.

22.69 27.23


Quantity:  





Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V 475738  (Ref: 28707)

Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V 475738

The micromot mains adaptor NG2/E is a 230V to 12V unit suitable for many of the Proxxon machines. The NORYL casing is heat resistant, which is a necessity for transformer enclosures. The red LED indicates readiness for use and the PTC element (Positive temperature coefficient) prevents overload of the unit. A foldable tool rest provides a secure place for keeping the Micromot tools at the ready. The mains adaptors do not include the illustrated mill/drill units.

DRILL NOT INCLUDED

Input Voltage 240V
Model NG 2/E
Nett Weight 1kg
Output Voltage 12V

25.92 31.10


Quantity:  





Proxxon Tools >  Proxxon 12 Volt Power Tools



Proxxon 12 Volt Power Tools - Buy online at www.proxxon-tools.com with FREE mainland UK delivery for all Proxxon Tools





Proxxon Tooling Homepage
checkout
  View Basket
Proxxon UK Delivery
Free UK Delivery