Proxxon Handheld Power Tools


Proxxon Tools >  Proxxon Handheld Power Tools


PROXXON MICROMOT 230/E DRILL GRINDER - NEW ! 28440  (Ref: 507275)

59.36 71.23

(Ref: 507275) Quantity:

With a diameter of 37mm and just 270g it offers convenient handling second to none in its class.

the new MICROMOT 230/E

For drilling, milling, grinding, polishing, brushing, cutting and engraving. The extremely slim housing of glass-fibre reinforced POLYAMIDE with a soft component grip area enables the unit to be handled with two fingers (pen grip).

Balanced, low noise special DC motor with high life expectancy. The maximum speed of 21,500rpm can be continuously reduced to 6,500rpm through full-wave electronics. Offering nearly the same torque also in the lower speed range. This is especially important for micro drilling, brushing and polishing. Ground, ball-bearing spindle. High quality MICROMOT steel collets: Even the smallest shafts are accurately clamped. No rattling or vibrating of bits and cutters.

Spindle for tool exchange can be locked at the push of a button. 20mm collar for use in MICROMOT drill stands and horizontal stands. Includes MICROMOT steel collets (1 each of 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm).

Technical data:
220 - 240 V. 50Hz. 80W. 6,500 - 21,500rpm. Weight 270g. Class 2 insulation.

NO 28 440



Note:
MICROMOT steel collets are hardened and thus have a high, consistent
flexibility. They also maintain prolonged accuracy, even after regular use
(not to be compared with unhardened, 4-slit collets and those made of brass or aluminium). The triple slit collet, which is much more difficult to produce than the 4-slit type, offers a much better load-bearing surface. This is especially important for the centrical clamping of cutters with small shaft diameters.

Proxxon Mill/Drill 230/E, Modeller's Set & Drill Set - PACKAGE DEAL  (Ref: 717735)

68.71 82.45

(Ref: 717735) Quantity:

This package comprises the Proxxon Mill/Drill MICROMOT 230/E, 13 Piece Modeller's Set and the 6 Piece HSS Twist Drill Set.

Proxxon Mill/Drill MICROMOT 230/EThe MICROMOT 230/E is designed for drilling, milling, grinding, polishing, brushing, cutting and engraving. The extremely slim housing of glass-fibre reinforced POLYAMIDE with a soft component grip area enables the unit to be handled with two fingers (pen grip). The maximum speed of 21,500rpm can be continuously reduced to 6,500rpm through full-wave electronics. This tool offers nearly the same torque in the lower speed range. This is especially important for micro-drilling, brushing and polishing. Ground, ball-bearing spindle. High quality MICROMOT steel collets.

Proxxon 13 Piece Modeller's SetFor cutting, milling, polishing and drilling. Two fine cylindrical milling bits 2.3mm diameter, two carborundum grinding bits (ball and cone), 1.0 and 2.3mm micro drills. One saw blade of 22mm diameter, five cutting discs of 22mm diameter and one arbor. All shafts 2.35mm.

Proxxon 6 Piece HSS Twist Drill SetA HSS twist drill set with centring point, sizes: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0mm. Use for precision drilling in wood, plastic non-ferrous metals, steel and stainless steel sheets. The titanium coating reduces friction and increases life expectancy. Shanks 3mm - 6 pieces.

Proxxon Mill/Drill MICROMOT 230/E

Slim, easily handled and light weight (270g)
Variable speed with feedback
Special balanced, low noise DC motor
Supplied with 6 collets
Proxxon 13 Piece Modeller's Set

For cutting, milling and drilling
2 fine cylindrical milling bits 2.3 mm diameter
2 carborundum grinding bits (ball and cone)
1.0 and 2.3 mm micro drills
1 saw blade 22mm dia.
5 cutting discs 22mm dia.
1 arbor
All shafts 2.35mm
Proxxon 6 Piece HSS Twist Drill Set

HSS twist drill set with centring point
1.5, 2.0, 2.5, 3.0, 3.5, 4.0mm
Titanium coated for long life
3mm shanks


Proxxon WP/E Angle Polisher 240v 28660  (Ref: 505913)

100.19 120.23

(Ref: 505913) Quantity:

Key Features

Perfect finishing, even in tight spots
Used for polishing, cleaning, sanding and rust removal
Powerful DC motor with continuously variable speed
Die-cast aluminium gear housing
Complete with a range of accessories
Polypropylene storage case

Proxxon miniature tools come with a reputation for quality and this small angle polisher is no exception. It uses a quiet, powerful DC motor with continuously variable speed control (full-wave electronics) for low and constant speeds even during high contact pressure. Motor power is transferred to the planetary gearing which is contained in a robust, die-cast aluminium housing. The main body of the machine is made from glass-fibre reinforced POLYAMIDE with a softer section on the underside making it more comfortable to hold. Supplied with a rubber backing disc with hook and loop fastening, polishing sponge (medium hard), lambswool polishing disc, polishing felt for metals and non-ferrous metals (medium hard), 12 sanding discs K 2000 and NIGRIN, polishing emulsion (75ml) as well as a microfibre cloth. The polisher and accessories are stored in a stylish polypropylene case with a handle and two snap closures, ready for immediate use.


Related products:

1. Backing disc for for Proxxon Long Neck Angle Grinder LWS 702028 (Ref: 28548)

Proxxon Polishing Sponge For WP/E 505908  (Ref: 28662)

4.17 5.00

(Ref: 28662) Quantity:

The medium hard blue polishing sponge can be used for applying polishing emulsion to painted and metal surfaces as well as further subsequent polishing. With hook and loop fastening. Supplied as a pair, 50mm diameter x 25mm.

Key Features

Used to apply polishing emulsion to painted and metal surfaces
Hook and loop fastening
Supplied as a pair

Proxxon Lambswool Polishing Disc For WP/E 505909  (Ref: 28664)

5.34 6.41

(Ref: 28664) Quantity:

Key Features

Dense lambswool bonnet
Hook and loop fastening
Supplied as a pair

A high quality, dense lambswool bonnet for polishing scratch-proof paints. Supplied as a pair, with hook and loop fastening, diameter 50mm.?

Proxxon Polishing Felt For WP/E 28666  (Ref: 505910)

4.88 5.86

(Ref: 505910) Quantity:



Proxxon OZI 220/E Multi Tool (Delta sander OZI 220/E  (Ref: 28520)

Proxxon OZI 220/E Multi Tool (Delta sander OZI 220/E

Oscillating motion ensures lack of vibration & kickback
Head of die-cast zinc, ensuring exact & stable housing for the working parts
For very tight spots, e.g. corners, sides & inaccessible areas
Variable speed facility ensures the correct speed for every material
3,000 - 10,000 orbits per minute
Self adhesive sanding pads ensure quick changing & optimum usage
Simply remove & rotate through 120° for a fresh corner.
Sanding area 65 x 65 x 65mm
Supplied with 4 sanding sheets (2 x 80grit, 1 each 150 and 240grit)


This multi use tool will sand, cut and rasp with the various accessories available. Using an oscillating motion the triangular head allows sanding in very tight spots, e.g. corners, sides and inaccessible areas, as well as the fitting of sawblades, scraper heads and files. The variable speed facility ensures the correct speed for every material, between 3,000 and 10,000 per minute. The head is die-cast zinc, ensuring exact and stable housing for the working parts, the main housing made of fibreglass reinforced POLYAMIDE. The oscillating motion ensures lack of vibration and kickback. Length 230mm, weight 630g, insulated to class II. The OZI is supplied with 4 sanding pads of different grits.(2 x 80grit, 1 each 150 and 240grit).

116.32 139.58


Quantity:  


Related products:
1. Proxxon Diamond Cutting Blade for OZI Delta Sander (Ref: 28902)
2. 8mm Proxxon HSS Plunge Saw Blades for OZI Delta Sander 477004 (Ref: 28897)
3. 16mm Proxxon HSS Plunge Saw Blades for OZI Delta Sander 486354 (Ref: 28898)
4. Pack 5 Sanding Pads 150 Grit for Proxxon OZI 220/E Sander (Ref: 28882)




Proxxon HSS  Cutting Blade for OZI 476855

Proxxon HSS Cutting Blade for OZI 476855  (Ref: 28900)

14.98 17.98

(Ref: 28900) Quantity:


Pack 5 Sanding Pads 150 Grit for Proxxon OZI 220/E Sander

Pack 5 Sanding Pads 150 Grit for Proxxon OZI 220/E Sander  (Ref: 28882)

2.84 3.41

(Ref: 28882) Quantity:


Bulk Pack 25 Sanding Pads 80 Grit for Proxxon OZI 220/E Sander 476905

Bulk Pack 25 Sanding Pads 80 Grit for Proxxon OZI 220/E Sander 476905  (Ref: 28891)

6.53 7.84

(Ref: 28891) Quantity:


Bulk Pack 25 Sanding Pads 150 Grit for Proxxon OZI 220/E Sander 476906

Bulk Pack 25 Sanding Pads 150 Grit for Proxxon OZI 220/E Sander 476906  (Ref: 28893)

6.53 7.84

(Ref: 28893) Quantity:


Bulk Pack 25 Sanding Pads 240 Grit for Proxxon OZI 220/E Sander 476907

Bulk Pack 25 Sanding Pads 240 Grit for Proxxon OZI 220/E Sander 476907  (Ref: 28895)

6.53 7.84

(Ref: 28895) Quantity:


Proxxon LB/E Long Neck Straight Drill/Grinder 474573  (Ref: 28485)

77.20 92.64

(Ref: 28485) Quantity:

Ideal for use in inaccessible areas.
Die-cast aluminium head
100mm neck and 20mm MICROMOT collar
Mill, drill, grind, polish
Allows use in slots and channels
High-revving, special motor, full-wave electronic speed control
Ground steel spindle runs in a ball bearing, minimising play
Six triple slit, hardened steel collets 1.0 to 3.2mm and closure nut included


Ideal for use in inaccessible areas, for milling, drilling, grinding and polishing operations. The head is die-cast aluminium with a 100mm neck and 20mm MICROMOT collar. The design allows the LB/E to be used in slots and channels and makes it ideal for internal cuts. The high-revving, special motor has full-wave electronic speed control and is usable for extended periods. The ground steel spindle runs in a ball bearing, minimising play. Six triple slit, hardened steel collets 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm and closure nut are included. With lock button for rapid cutter changing.Technical Data: 220 - 240V. 50/60Hz. 5,000 to 20,000rpm. Stable head of die-cast alu and fibreglass reinforced POLYAMIDE main housing. Length 300mm. Weight 630 g. Insulated to class 2. The 20mm collar allows fitting of optional drill stands, horizontal stands, etc.


Related products:

1. Proxxon 9 Piece Electronic Technician Set (Ref: 28930)
2. Proxxon 18mm Sanding Discs with Arbor 202358 (Ref: 28982)
3. Proxxon Corundum Grinding Wheels (10 discs) 477592 (Ref: 28302)
4. Proxxon Flexible Polishing Points 5 x 15mm (Pkt 5) 202327 (Ref: 28288)
5. Proxxon Flexible Silicone Polishing Discs Flat 477212 (Ref: 28294)
6. Proxxon Corundum Cutting Discs and arbor - 38mm 477600 (Ref: 28820)
7. Proxxon Flap Sanding Wheel 120g - 30mm 202361 (Ref: 28985)
8. Proxxon Wire Wheel Brush - Brass 22 mm (Pkt 5) 202356 (Ref: 28962)

Proxxon WB 220/E Long Neck Angle Milling/Drilling Unit 474523  (Ref: 28492)

88.51 106.21

(Ref: 28492) Quantity:

Ideal for milling, drilling and more in hard to reach places, e.g. in model ships' hulls, as well as the cutting of small timber pieces. Special, balanced motor with maximum power output of 100W, full wave electronic speed control.

Variable speed 3,000 - 15,000rpm
Head of die-cast: aluminium
Housing made of fibreglass reinforced POLYAMIDE
Power: 100W
Supplied with 6 collets, 1.0 to 3.2mm
More...


Related products:

1. Proxxon 13 Piece Modeller's Set 476855 (Ref: 28910)
2. Proxxon Complete Polishing Set 476719 (Ref: 28285)
3. Proxxon 10 Piece HSS Twist Drill Set 477602 (Ref: 28874)
4. Proxxon HSS Micro Drills - 0.5mm (Ptk 3) 477538 (Ref: 28864)
5. Proxxon HSS Cutter - 6mm Dia (Pkt 2) Pointed 202336 (Ref: 28724)
6. Proxxon 2 Piece Tungsten Carbide Milling Bit Set 477254 (Ref: 28750)
7. Proxxon Wire Wheel Brush - Steel 22 mm (Pkt 5) 202353 (Ref: 28952)
8. Proxxon End Wire Brush - Steel 8mm (Pkt 2) 202352 (Ref: 28951)
9. Proxxon Felt Polishing Tip Bullet - 8 x 15mm (Pkt 2) 211068 (Ref: 28801)

Proxxon IBS/E Professional Mini Drill/Grinder - 240V 300121  (Ref: 28481)

75.99 91.19

(Ref: 28481) Quantity:

Very precise and accurate
Aluminium motor casing
Variable speed (5,000-20,000rpm)
Supplied in carrying case with 30 accessories
Six collets from 0.8mm to 3.2mm


A very precise and accurate mini-tool drill with an aluminium motor casing and variable speed (5,000-20,000rpm) suited to professional use in the workshop. The aluminium casing dramatically reduces any potential bearing problems resulting in an exceptionally smooth and vibration free tool to use. Supplied in a carrying case with 30 accessories and full set of six collets from 0.8mm to 3.2mm Please note that this unit will not accept a keyless chuck.




Related products:
1. Proxxon Complete Polishing Set 476719 (Ref: 28285)
2. Proxxon 13 Piece Modeller's Set 476855 (Ref: 28910)
3. Proxxon 6 Piece HSS Twist Drill Set 476782 (Ref: 28876)
4. Silicon Carbide Grinding Wheels (10 discs) 202331 (Ref: 28304)
5. Proxxon Spring Steel Cutting Blades (Ref: 28830)
6. Proxxon Reinforced Aluminium Oxide Cutting Discs & Arbor - 38mm (Pkt 5) 477258 (Ref: 28818)
7. Proxxon Leather Polisher 22 mm Pack of 2 (Ref: 28298)
8. Proxxon Wire Wheel Brush - Brass 22 mm (Pkt 5) 202356 (Ref: 28962)
9. Proxxon Felt Polishing Tip Wheel - 3 x 16mm (Pkt 2) 211070 (Ref: 28803)

Proxxon 10 Piece Router Bit Set 475319

Proxxon 10 Piece Router Bit Set 475319  (Ref: 29020)

25.93 31.12

(Ref: 29020) Quantity:

Tungsten carbide wood router cutters. For cutting hard wood, fibreboard and plastic. Clean relief grinding for good work results and surface quality. High stability. For manufacturing slots, sections, radii and other profiles. For crafting picture frames. Shafts 3.2mm. Neatly packed in wooden box.

Slot cutter: Diameter 3.2mm (29024)
Slot cutter: Diameter 5.0mm (29026)
Slot cutter: Diameter 6.5mm (29028)
Rounding over cutter: Diameter 6.4mm (29030)
V-slot cutter: Diameter 6.5mm (29032)
Combi cutter: 6.5/2.5mm (29034)
Core box bit: 3.2mm radius (29036)
Rebating cutter: 6.4mm (29038)
Edge cutter with pin: Diameter 5.0mm (29040)
Half round cutter: Diameter 13mm (29042)

Proxxon BBS/S Compact Belt Sander 702042  (Ref: 28526)

119.61 143.53

(Ref: 28526) Quantity:

Small compact sander for modelling
Fine adjustment for the rollers prevents belt run off
40mm wide
Spring clamping system for easy tool-less replacement of belts
Supplied in a sturdy plastic carrying case with 5 each 120g and 240g sanding belts and screw clamp


Compact, light and well balanced, (only 175mm long) with super driving power for maximum sanding performance! The 40mm wide sanding belt is located flush on the left side to allow surfaces to be sanded "right down to the corner". A fine adjustment for the rollers prevents run off on the side. Spring clamping system for easy replacement of belts without tool.

Supplied with a sturdy plastic carrying case together with 5 each 120 grit and 240 grit sanding belts and a clamp for stationary, inverted use.


Related products:

1. 5 x 80 Grit Sanding Band for Proxxon BBS/S Belt Sander 702043 (Ref: 28922)
2. 5 x 150 Grit Sanding Band for Proxxon BBS/S Belt Sander 702044 (Ref: 28924)

5 x 80 Grit Sanding Band for Proxxon BBS/S Belt Sander 702043  (Ref: 28922)

5.65 6.78

(Ref: 28922) Quantity:


5 x 150 Grit Sanding Band for Proxxon BBS/S Belt Sander 702044

5 x 150 Grit Sanding Band for Proxxon BBS/S Belt Sander 702044  (Ref: 28924)

5.65 6.78

(Ref: 28924) Quantity:


Proxxon Precision drill/grinder FBS 240/E 410475  (Ref: 28472)

54.99 65.99

(Ref: 28472) Quantity:

Multiple uses; cuts, sands, polishes and grinds, etc.
0.3-3.2mm keyless chuck
Variable speed
Two inset rubber body grips
Permanent magnet motor
Maximum motor power 100W
Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories


This 100W multi tool has a keyless chuck (0.3-3.2mm) to accept a wide range of accessories, well balanced and with variable speed for maximum control. The tool is well designed and the two inset rubber grips on the body ensure a good purchase, important for fine detail work. The permanent magnet motor is powerful and well balanced and the variable speed control gives a range of 5,000 to 20,000rpm. At the opposite end to the drill chuck is a hanging loop, used when the tool is coupled up to a flexible shaft. This tool has a quality specification, a flexible drive shaft with precision handpiece and 1.0mm, 2.4mm and 3.0mm collets is also available as an optional extra. Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories.


Specification for Proxxon FBS 240/E Precision Drill/Grinder Multi -Tool:
Chuck: Cap/Type 0.3 to 3.2mm keyless
Model: FBS 240/E
Nett Weight: 450g
Power: 100W
Speed: 5,000-20,000rpm



Related products:

1. Proxxon 13 Piece Modeller's Set 476855 (Ref: 28910)
2. Proxxon Complete Polishing Set 476719 (Ref: 28285)
3. Proxxon Tungsten Carbide Micro Drills 1.0 mm - Packs 2 476989 (Ref: 28324)
4. Proxxon Corundum Grinding Bit Asprin 6mm Dia. (Pkt 5) 202342 (Ref: 28776)
5. Proxxon 18mm Sanding Discs with Arbor 202358 (Ref: 28982)
6. Proxxon Wire Wheel Brush - Steel 22 mm (Pkt 5) 202353 (Ref: 28952)
7. Proxxon Sanding Drums 120 grit - Packs 10 with Arbor 210503 (Ref: 28978)
8. Proxxon Flexible Polishing Tips 202330 (Ref: 28295)
9. Proxxon Flexible Polishing Points 5 x 15mm (Pkt 5) 202327 (Ref: 28288)
10. Proxxon Diamond Coated Cutting Disc (Diamond-coated cutting discs with cooling holes) 950540 (Ref: 28844)

Proxxon FBS 240/E Multitool & Flexi Shaft - PACKAGE DEAL  (Ref: 718858)

72.01 86.41

(Ref: 718858) Quantity:

Key Features

Proxxon FBS 240/E Precision Drill/Grinder Multi -Tool

Multiple uses; cuts, sands, polishes and grinds, etc.
0.3-3.2mm keyless chuck
Variable speed
Two inset rubber body grips
Permanent magnet motor
Maximum motor power 100W
Supplied in a plastic storage case
43 cutting, grinding, drilling and sanding accessories
Proxxon 110/P Flexi-Shaft

1,000mm flexible shaft
Six steel collets - 1mm to 3.2mm

Package deal comprises the Proxxon FBS 240/E Precision Drill/Grinder Multi -Tool and the Proxxon 110/P Flexi-Shaft.

Proxxon FBS 240/E Precision Drill/Grinder Multi -Tool

This 100W multi tool has a keyless chuck (0.3-3.2mm) to accept a wide range of accessories, well balanced and with variable speed for maximum control. The tool is well designed and the two inset rubber grips on the body ensure a good purchase, important for fine detail work. The permanent magnet motor is powerful and well balanced and the variable speed control gives a range of 5,000 to 20,000rpm. At the opposite end to the drill chuck is a hanging loop, used when the tool is coupled up to a flexible shaft. This tool has a quality specification, a flexible drive shaft with precision handpiece and 1.0mm, 2.4mm and 3.0mm collets is also available as an optional extra. Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories.

Proxxon 110/P Flexi-Shaft

A truly flexible shaft some 1 metre long with delicate hand piece complete with six steel collets (ranging from 1mm to 3.2mm) for accurate holding of rotary tools and collet nut. Suitable for use with any of the Proxxon range of tools or indeed any type of power source that can grip the 3mm male shaft of the unit.

Proxxon FBS 240E Multitool, Drill Stand & Machine Vice - PACKAGE DEAL  (Ref: 717737)

91.79 110.15

(Ref: 717737) Quantity:

This package comprises the Proxxon FBS 240/E Precision Drill/Grinder Multi-Tool, MICROMOT MB 140/S Drill Stand and the Proxxon MS 4 Machine Vice.

Proxxon FBS 240/E Precision Drill/Grinder Multi-ToolThis 100W multi-tool has a keyless chuck (0.3-3.2mm) to accept a wide range of accessories, well balanced and with variable speed for maximum control. The tool is well designed and the two inset rubber grips on the body ensure a good purchase, important for fine detail work. The permanent magnet motor is powerful and well balanced and the variable speed control gives a range of 5,000 to 20,000rpm. At the opposite end to the drill chuck is a hanging loop, used when the tool is coupled up to a flexible shaft. This tool has a quality specification, a flexible drive shaft with precision handpiece and 1.0mm, 2.4mm and 3.0mm collets is also available as an optional extra. Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories.

Proxxon MICROMOT MB 140/S Drill StandThe 120 x 220mm milled table is fitted with a fence and a scale. The solid column is chrome plated and the headstock is of die-cast aluminium, offering a throat capacity of 140mm and 30mm travel. A chromed feed lever operates via a drive disc and ball-bearing system, offering a sensitive feed set-up. T-bars allow simple height adjustment as well as the fixing of the mill drill in the 20mm bore fitting. The mill drill collar, with scale, tilts through 90° in both directions. The drill stand features a depth stop as well as drilled, tapped holes for securing the KT 70 Compound Table. The MS 4 Machine Vice can also be fitted, it is made of die-cast zinc with three machined sides and horizontal and vertical V-slots in the jaws. Jaw width 50mm and height 10mm. Maximum clamping width 34mm.

Proxxon MS 4 Machine ViceThe MS 4 Machine Vice is made of die-cast zinc with three machined sides and horizontal & vertical V-slots in the jaws. Jaw width 50mm and height 10mm. Maximum clamping width 34mm.

Key Features

Proxxon FBS 240/E Precision Drill/Grinder Multi-Tool

Multiple uses; cuts, sands, polishes and grinds, etc.
0.3-3.2mm keyless chuck
Variable speed
2 inset rubber body grips
Permanent magnet motor
Maximum motor power 100W
Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories
Proxxon MICROMOT MB 140/S Drill Stand

120 x 220mm table fitted with fence and scale
Solid column is chrome plated
Throat capacity of 140mm & 30mm travel
Collar with 20mm bore for fixing tools
Tilts through 90° in both directions
Depth stop
Proxxon MS 4 Machine Vice

Die-cast zinc with three machined sides
Slot fits the adjustable fence of the drill stand MB 140/S & bench drill TBM 220
Horizontal & vertical V-slots in jaw
Jaw width 50 mm & height 10mm
Maximum clamping width 34mm

PROXXON FBS 240/E DRILL GRINDER , FLEXISHAFT , VICE AND DRILL STAND PACKAGE  (Ref: 717492)

108.00 129.60

(Ref: 717492) Quantity:

SPECIAL OFFER WHILE STOCKS LAST



This package comprises the following

Proxxon FBS 240/E Precision Grinder Multi Tool - List Price - £49.58 (£59.49 inc vat )
Proxxon Flexible Shaft - List Price - £24.96 (£29.95 inc vat)
Proxxon MS4 Machine Vice - List Price - £12.46 (£14.95 inc vat)
Proxxon MB 140/S Drill Stand - List Price - £39.29 (£47.14 inc vat)


Total List Price - £126.29 (£151.54 inc vat)






FBS 240/E DETAILS

Multiple uses; cuts, sands, polishes and grinds, etc.
0.3-3.2mm keyless chuck
Variable speed
Two inset rubber body grips
Permanent magnet motor
Maximum motor power 100W
Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories

This 100W multi tool has a keyless chuck (0.3-3.2mm) to accept a wide range of accessories, well balanced and with variable speed for maximum control. The tool is well designed and the two inset rubber grips on the body ensure a good purchase, important for fine detail work. The permanent magnet motor is powerful and well balanced and the variable speed control gives a range of 5,000 to 20,000rpm. At the opposite end to the drill chuck is a hanging loop, used when the tool is coupled up to a flexible shaft. This tool has a quality specification, a flexible drive shaft with precision handpiece and 1.0mm, 2.4mm and 3.0mm collets is also available as an optional extra. Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories.

Specification for Proxxon FBS 240/E Precision Drill/Grinder Multi -Tool:
Chuck: Cap/Type 0.3 to 3.2mm keyless
Model: FBS 240/E
Nett Weight: 450g
Power: 100W
Speed: 5,000-20,000rpm

Proxxon FBS 240/E Multitool, 110/P Flexi-Shaft & UHZ Holder - PACKAGE DEAL  (Ref: 717583)

79.13 94.96

(Ref: 717583) Quantity:

Key Features

Proxxon FBS 240/E Precision Drill/Grinder Multi-Tool

Multiple uses; cuts, sands, polishes and grinds, etc.
0.3-3.2mm keyless chuck
Variable speed
2 inset rubber body grips
Permanent magnet motor
Maximum motor power 100W
Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories
Proxxon 110/P Flexi-Shaft

1,000mm flexible shaft
Six steel collets - 1mm to 3.2mm
Proxxon UHZ Universal Holder

Ball & socket plus clamp
34mm bore accepts all MICROMOT machines
Ball joint may be swivelled in all directions

Package deal comprises the Proxxon FBS 240/E Precision Drill/Grinder Multi-Tool, Proxxon 110/P Flexi-Shaft and the Proxxon UHZ Universal Holder

Proxxon FBS 240/E Precision Drill/Grinder Multi-ToolThis 100W multi-tool has a keyless chuck (0.3-3.2mm) to accept a wide range of accessories, well balanced and with variable speed for maximum control. The tool is well designed and the two inset rubber grips on the body ensure a good purchase, important for fine detail work. The permanent magnet motor is powerful and well balanced and the variable speed control gives a range of 5,000 to 20,000rpm. At the opposite end to the drill chuck is a hanging loop, used when the tool is coupled up to a flexible shaft. This tool has a quality specification, a flexible drive shaft with precision handpiece and 1.0mm, 2.4mm and 3.0mm collets is also available as an optional extra. Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories.

Proxxon 110/P Flexi-ShaftA truly flexible shaft some 1 metre long. The precision aluminium hand piece features a milled steel shaft and dual ball-bearings. The highly-flexible core ensures no overheating even when working tight radii. Length 1,000mm, maximum speed 25,000rpm.Fitted with a delicate hand piece complete with six steel collets (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm) for accurate holding of rotary tools and collet nut. Suitable for use with any of the Proxxon range of tools or indeed any type of power source that can grip the 3mm male shaft of the unit.

Proxxon UHZ Universal HolderSocket & clamp like the precision vice FMZ. The ball joint may be swivelled in all directions. 34mm bore accepts all MICROMOT machines.









Proxxon LWS Long Neck Angle Grinder 240V 702027  (Ref: 28547)

Proxxon LWS Long Neck Angle Grinder 240V 702027

For steel, non-ferrous metals, glass, ceramics, wood and plastic
Supplied with grinding disc, fan sander and cutting disc in neat plastic case
Quiet and long lasting DC motor


For working with steel, non-ferrous metals, glass, ceramics, wood and plastic. For cutting, rough-machining, grinding, precision polishing, fine polishing and carving wood. It features a specially balanced, 100W powerful, quiet and long lasting DC motor. Supplied with a grinding disc (60 grit), fan sander (100 grit) and cutting disc in neat plastic case. This grinder will accept the blades for the arbortech mini carver which further increases its potential for texturing and carving. >!<.

Disc Diameter: 50mm
Length:: 250mm
Model LWS
Nett Weight 550g
Power: 100W
Speed: 13,000rpm


85.28 102.34


Quantity:  


Related products:
1. Backing disc for for Proxxon Long Neck Angle Grinder LWS 702028 (Ref: 28548)
2. 12 Pack 80 G Corundum sanding discs for for Proxxon Long Neck Angle Grinder LWS 702030 (Ref: 28549)
3. Corundum grinding discs for for Proxxon Long Neck Angle Grinder LWS - 60 grit 702035 (Ref: 28585)
4. Silicon carbide grinding disc for for Proxxon Long Neck Angle Grinder LWS - 60 grit 702037 (Ref: 28587)
5. Corundum fan sanders for for Proxxon Long Neck Angle Grinder LWS - 100 grit 702038 (Ref: 28590)
6. Rasp plate with metal burrs made from wolfram carbide for LWS 702041 (Ref: 29050)




Proxxon LHW Long Neck Angle Grinder c/w Arbortech Mini Blades  (Ref: 718300)

96.54 115.85

(Ref: 718300) Quantity:

SPECIAL OFFER WHILE STOCKS LAST !


Key Features

Perfect for texturing your woodturning
For steel, non-ferrous metals, glass, ceramics, wood and plastic
Supplied with grinding disc, fan sander and cutting disc in neat plastic case
Quiet and long lasting DC motor
Supplied with 2 Arbortech mini blades

For working with steel, non-ferrous metals, glass, ceramics, wood and plastic. For cutting, rough-machining, grinding, precision polishing, fine polishing and texturing wood. It features a specially balanced, 100W powerful, quiet and long lasting DC motor. Supplied with a grinding disc (60 grit), fan sander (100 grit) and cutting disc in neat plastic case. This grinder will accept the blades for the Arbortech mini carver which further increases its potential for texturing or shaping. Supplied with a pack of 2 Arbortech mini blades. Remember, it is important to keep your blades sharp and to be used with smaller projects. N.B. Machine must be used in accordance with instructions as prolonged hard use will significantly reduce motor life.

Arbortech Mini Carver Blades for Proxxon LWS Long Neck Angle Grinder  (Ref: 600491)

11.29 13.55

(Ref: 600491) Quantity:

Key Features

Resharpenable blades (Pkt 2)
10mm depth of cut
Made from hardened steel
3mm width of kerf
Resharpen using a 4mm file

Proxxon BSL 220/E Belt Sander 474455  (Ref: 28536)

95.38 114.46

(Ref: 28536) Quantity:

This is a high quality industrial power tool albeit much reduced in size from the norm, therefore perfectly suited to smaller more intricate tasks or delicate finishing or refining. It is designed for shape finishing and fine polishing (flat surfaces). Also extremely useful for de-burring metal, paint removal and fine finishing. The powerful 100W motor features full wave electronic speed control. The head is die-cast aluminium with the main housing made of fibreglass reinforced polyamide. The head can be angled at 0°, 45° and 90° to the body at the press of a button. The sanding belt can be changed in a matter of seconds. Packed in durable plastic case, including 4 sanding belts (2 of each 80 and 180 grit).


100W powerful motor
Variable speed 300 - 700 m/min
Sanding belt only 10mm wide
Die-cast aluminium head; fibreglass reinforced POLYAMIDE body
Total length only 350mm, weight: 650g
Perfect for intricate jobs, delicate finishing or refining
The head can be angled at 0°, 45° and 90° to the body
Supplied in case, including 4 sanding belts (2 of each 80 and 180 grit)





Related products:

1. Proxxon Replacement belts for BSL 220/E 80 grit PACK OF FIVE ! 477686 (Ref: 28583)
2. Proxxon Replacement belts for BSL 220/E 120 grit PACK OF FIVE ! 477685 (Ref: 28582)
3. Proxxon Replacement belts for BSL 220/E 180 grit PACK OF FIVE ! (Ref: 28581)

Proxxon Replacement belts for BSL 220/E 80 grit PACK OF FIVE ! 477686  (Ref: 28583)

3.30 3.96

(Ref: 28583) Quantity:

80 Grit Corundum on tear-resistant, woven backing. Sands metal, non-ferrous metals, wood and plastics efficiently. 10 x 330mm.

Proxxon Replacement belts for BSL 220/E 120 grit PACK OF FIVE ! 477685  (Ref: 28582)

3.30 3.96

(Ref: 28582) Quantity:

120 Grit Corundum on tear-resistant, woven backing. Sands metal, non-ferrous metals, wood and plastics efficiently. 10 x 330mm.

Proxxon Replacement belts for BSL 220/E 180 grit PACK OF FIVE !  (Ref: 28581)

3.30 3.96

(Ref: 28581) Quantity:

180 Grit Corundum on tear-resistant, woven backing. Sands metal, non-ferrous metals, wood and plastics efficiently. 10 x 330mm.

Proxxon MSG Motorised Carver 702047  (Ref: 28644)

100.23 120.28

(Ref: 28644) Quantity:


For woodcarvers, model makers and joiners. With a die-cast aluminium gear head. For the carving of all types of wood. For the restoration of furniture and antiques. For lino cuts and precision paint removal. It is also possible to carve plaster. Special balanced, low noise 50W DC motor with extremely high life expectancy. Gear head made of die-cast aluminium. Main housing of glass fibre reinforced polyamide. Optional accessories include a set of five chisels (two gouges, Vee tool, chisel and curved tip chisel) and a profiled sharpening stone. The MSG is supplied in a carry case along with three high-grade bi-metal Japanese blades (gouge, Vee tool and chisel). Also available complete with the Flexcut SK109 adaptor which enables the fitting of any of the Flexcut SK range of individual carving tools.Supplied in a carry case along with three high-grade bi-metal Japanese blades (gouge, vee tool and chisel).

Length 230mm
Model MSG
Nett Weight 680g
Power 50W
Stroke Rate 10,000rpm




Related products:

1. Proxxon Replacement Carving Blades for MOS 702048 (Ref: 28572)
2. Proxxon TCT Conical Rasp 8 x 12mm (Ref: 475923)
3. Proxxon TCT Cylinder Rasp (Rounded Head) 7.5 x 12mm 29060 (Ref: 475922.)
4. Proxxon TCT Needle Rasp 4 x 19mm (Ref: 476147)

Proxxon MSG Carver, Flexcut Slipstrop & Flexcut Gouges Package  (Ref: 718253X)

137.00 164.40

(Ref: 718253X) Quantity:

SPECIAL OFFER WHILE STOCKS LAST !

Key Features

For woodcarvers, model makers and sculptors
Special balanced, low noise DC motor
Includes 3 Japanese bi-metal blades
Supplied in storage case

The Proxxon MSG carver features a low noise 50W DC motor with extremely high life expectancy. The gear head is made of die-cast aluminium and the main housing, glass fibre reinforced polyamide. It is excellent for the carving of all types of wood and plaster. Very popular for woodcarving, antique restoration and lino cuts, the MSG is supplied in a carry case along with three high-grade bi-metal Japanese blades (gouge, Vee tool and chisel). This great value package includes the Proxxon MSG carver, the Flexcut Slipstrop with compound and a set of four Flexcut RG310 detail gouges.

Proxxon MSG Carver & Flexcut RG100 Power Carving Deluxe Set (14 Piece) Package  (Ref: 717057)

201.83 242.20

(Ref: 717057) Quantity:

Key Features

For joiners, model makers and woodcarvers
Special balanced, low noise DC motor
Includes 3 Japanese bi-metal blades
Supplied in storage case
Super sharp Flexcut blades
The set comprises:
RG302 #9 x 1/2" gouge

RG307 70° x 1/4" Vee-Tool

RG403 70° x 3/8" Vee-Tool

RG203 90° x 11/16" Vee-Tool

RG305 #3 x 3/8" gouge

RG400 #3 x 5/8" gouge

RG300 #3 x 3/4" gouge

RG200 #3 x 1" gouge

RG306 #6 x 5/16" gouge

RG401 #5 x 9/16" gouge

RG301 #5 x 5/8" gouge

RG201 #5 x 7/8" gouge

RG309 #11 x 1/8" gouge

RG402 #8 x 3/8" gouge

We have teamed up two excellent products and created the ultimate set for power carving. The Proxxon MSG carver is one of the easiest power carvers to use, just push the blade in and you are carving within seconds. The 10,000 strokes per minute allow for clean, effortless and precision carving and when used with the Flexcut RG100 Power Carving gouges. This set includes; #3 x 3/8"(9mm), #3 x 5/8"(16mm), #3 x 3/4"(19mm), #3 x 1"(25mm), #5 x 9/16"(14mm), #5 x 5/8"(16mm), #5 x 7/8"(22mm), #6 x 5/16"(8mm), #8 x 3/8"(9mm), #9 x 1/2"(12.7mm), #11 x 1/8"(3mm) gouges and 70° x 1/4"(6mm), 70° x 3/8"(9mm), 90° x 11/16"(17.5mm) vee tools. Making this set perfect for carving the smaller details such as eyes and other facial features. The package offers everything and more for those of us who are seeking that professional touch to our work. All this and we’ve carved out a great saving with nearly £20 on the combined price.

Proxxon MH 550 Micro Heat Gun 27130  (Ref: 950537)

32.63 39.16

(Ref: 950537) Quantity:

Compact heat gun for smaller jobs
Two heat settings, 350° and 550°
Strong case with soft grip and feet for stationary use
Stainless steel nozzle and three additional push fit nozzles
Perfect for small modelling or electronic tasks


A nice compact heat gun for small jobs where a normal unit would be far too big or aggresive. The housing is made from glass fibre reinforced polyamide with soft grip and feet for stationary use. A powerful 500W element produces an even temperature in two stages, 350° and 550°, with a protection thermostat to prevent overheating. The nozzle is made from stainless steel, three push fit extra nozzles are provided, spot, fan and reflector. Perfect for shaping plastics, soldering and de-soldering electrical components or removing paint and varnish from small items.

Specification for Proxxon MH 550 Micro Heat Gun:
Air Flow: 180l/min
Model: MH 550
Nett Weight:: 500g
Power 500W
Temperature: 350 & 550°

Proxxon SS 230/E Super Jig Saw 474574  (Ref: 28530)

80.43 96.52

(Ref: 28530) Quantity:

Precision equipment for cutting. Small & comfortable.
Die-cast aluminium head
Excellent cutting capacity for smaller work
Housing head is die-cast aluminium for longevity
Foot is adjustable up to 45° for mitre cuts
Stroke speed is variable by a full wave electronic speed control
2,000 - 4,500 per min
Ideal for very tight curves in wood, PC cards to 5mm & non-ferrous metals to 3mm
Complete with storage case & 4 Super-Cut blades for wood, plastic & metal


This is a precision jigsaw for cutting smaller and more intricate work. The main housing is die-cast aluminium for longevity. The base tilts up to 45° for mitre/angled cuts. The stroke speed is variable between 2,000 and 4,500 strokes per minute, with full wave electronic speed control. An ideal tool for cutting very tight curves in wood, PC cards (up to 5mm thick) and non-ferrous metals (up to 3mm thick). It is supplied in tough moulded case with 4 Super-Cut blades for wood, plastic & metal. Maximum power consumption 100W, 220 - 240V. Stable head of die-cast aluminium; main housing made of fibreglass reinforced polyamide. Length 230mm. Weight 700g. Insulated to class 2.




Related products:

1. Proxxon Supercut Jigsaw Blades (Pack of 2) 477733 (Ref: 28054)
2. Proxxon HSS Jigsaw Blades (Pack of 2) 47762 (Ref: 28056)


Proxxon Tools >  Proxxon Handheld Power Tools



Proxxon Handheld Power Tools - Buy online at www.proxxon-tools.com with FREE mainland UK delivery for all Proxxon Tools





Proxxon Tooling Homepage
checkout
  View Basket
Proxxon UK Delivery
Free UK Delivery