Proxxon Milling Machines


Proxxon Tools >  Proxxon Milling Machines



Proxxon Micro Miller FF230  (Ref: 474050)

Proxxon Micro Miller FF230

Key Features

Headstock swivels through 360°
6 spindle speeds: 280 to 2,200rpm
Supplied with collets 6, 8 & 10mm
Headstock tilts and locks in position
Large 270 x 80mm machined steel crosstable with 3 T-slots
X x Y travel = 170mm x 65mm
Column diameter 35 x 400mm long

This is an extremely accurate small mill for model making and precision part making. The headstock swivels through 360°, indicated on a scale. Height is adjusted via a zero adjustable handwheel, also used as fine feed when milling (one revolution equals 1mm travel). The quill and headstock may be locked in position, essential when milling. Spindle speeds range from 280-2,200 rpm. The powerful motor drives the spindle via a poly-V belt, yielding high torques, especially at lower speeds. 6,8 and 10mm collets are included. The solid table is T-slotted to the MICROMOT norm of 12 x 6 x 5mm. Beautifully made and a pleasure to use.

The clamps , cutters and fine feed are not included and are optional extras

693.00 831.60


Quantity:  


Related products:
1. Proxxon 5 Piece Collet Set for PD 230 Lathe & FF 230 Mill 24144 (Ref: 474685)





Fine Feed for Proxxon FF 230  (Ref: 24140.)

Fine Feed for Proxxon FF 230

76.17 91.40


Quantity:  





Clamp Kit for FF 230 Mill & KT 150 475173  (Ref: 24257)

Clamp Kit for FF 230 Mill  & KT 150 475173

32.53 39.04


Quantity:  





Proxxon Precision Steel Vice 24255  (Ref: 474868)

Proxxon Precision Steel Vice 24255

Key Features

Milled in steel
May be used on its side and back
Jaw width 60mm, clamping capacity 42mm
Complete with securing bolts
Packed in a wooden bo

56.97 68.36


Quantity:  





Proxxon Pair of Precision V-Blocks 24262  (Ref: 475267)

Proxxon Pair of Precision V-Blocks 24262

Key Features

Milled in steel
May be used on its side and back
Jaw width 60mm, clamping capacity 42mm
Complete with securing bolts
Packed in a wooden box

33.37 40.04


Quantity:  





Proxxon TA 230 Dividing Attachment for PD 230/E Lathe and FF230 Mill  (Ref: 474254)

Proxxon TA 230 Dividing Attachment for PD 230/E Lathe and FF230 Mill

Key Features

Facilitates the matching of gear teeth and non-concentric patterns
Supplied with two dividing discs (40 & 48 steps)
May be fitted to the lathe's cross slide or to the bed
Supplied in a wooden box

155.00 186.00


Quantity:  





Proxxon 5 Piece Collet Set for PD 230 Lathe & FF 230 Mill 24144  (Ref: 474685)

Proxxon 5 Piece Collet Set for PD 230 Lathe  & FF 230 Mill 24144

Key Features

1 each: 2.4, 3.0, 3.2, 4.0 & 5.0mm
Supplied in wooden box

74.39 89.27


Quantity:  





Proxxon Edge Finder Set 24434  (Ref: 475537)

Proxxon Edge Finder Set 24434

Key Features

For fast and accurate location of starting point of workpieces
Size 6 x 6 x 50mm & 6 x 5 x 75mm
Supplied in a wooden box

24.87 29.84


Quantity:  





Proxxon MF 70 Milling Machine 371104  (Ref: 27110)

Proxxon MF 70 Milling Machine 371104

This is a super little machine, well suited to modelling work and for the manufacture of small precision components in a variety of materials. The extruded aluminium compound table has low backlash leadscrews and adjustable gib plates for smooth, accurate movement. Supplied complete with a set of six collets of 1.0mm, 1.5mm, 2.0mm, 2.4mm, 3.0mm, 3.2mm diameter and a work clamping kit. An optional set of solid carbide cutters is available, sizes 1.0mm, 2.0mm and 3.0mm.

Specification for Proxxon MF 70 Milling Machine:
Base Size 130 x 225mm
Collets Supplied 1.0mm,1.5mm,2.0mm,2.4mm,3.0mm,3.2mm
Lateral Table Movement 46mm
Longitudinal Table Movement 134mm
Model MF70
Nett Weight 7kg
Overall L x W x H 270 x 270 x 340mm
Power 100W
Spindle Speed 5,000-20,000rpm
Spindle Travel 80mm
T Slot Size 12 x 6 x 5mm
Table Size 200 x 70mm
Table Travel 134 x 46mm


225.29 270.35


Quantity:  


Related products:
1. Proxxon MICROMOT Steel Collet Set 477028 (Ref: 28940)
2. Proxxon MICROMOT Step Clamp Set 702051 (Ref: 24256)
3. Proxxon 3 Piece Tungsten Milling Cutter Set (Ref: 27116)
4. Proxxon MS 4 Machine Vice 486352 (Ref: 28132)
5. Proxxon Dividing Head for MF70 & TBM220 474592 (Ref: 24264)





PROXXON MF 70 MILLING MACHINE & PM 40 VICE PACKAGE  (Ref: 717497)

PROXXON MF 70 MILLING MACHINE & PM 40 VICE PACKAGE

CLICK HERE FOR THE SPECIAL OFFERS LEAFLET

This offer comprices the Proxxon MF 70 Milling Machine together with the PM 40 Precision Steel Vice

Proxxon MF 70 Milling Machine Specification


This is a super little machine, well suited to modelling work and for the manufacture of small precision components in a variety of materials. The extruded aluminium compound table has low backlash leadscrews and adjustable gib plates for smooth, accurate movement. Supplied complete with a set of six collets of 1.0mm, 1.5mm, 2.0mm, 2.4mm, 3.0mm, 3.2mm diameter and a work clamping kit. An optional set of solid carbide cutters is available, sizes 1.0mm, 2.0mm and 3.0mm.

Base Size 130 x 225mm
Collets Supplied 1.0mm,1.5mm,2.0mm,2.4mm,3.0mm,3.2mm
Lateral Table Movement 46mm
Longitudinal Table Movement 134mm
Model MF70
Nett Weight 7kg
Overall L x W x H 270 x 270 x 340mm
Power 100W
Spindle Speed 5,000-20,000rpm
Spindle Travel 80mm
T Slot Size 12 x 6 x 5mm
Table Size 200 x 70mm
Table Travel 134 x 46mm

Proxxon PM 40 Precision Steel Vice

Key Features

Milled of steel
Jaw width 46mm, clamping capacity 30mm
Total length 70mm
Especially for accurate work with MICRO Miller MF 70 or Compound Table KT 70
Sliding blocks and fixing screws included
Supplied in a wooden box

List Price for these two items is £279.46 (£335.35 inc vat)

OUR PRICE ONLY £249.96 (£299.95 INC VAT)

£299.95 INC VAT !!

AND DON'T FORGET FREE UK MAINLAND DELIVERY

240.23 288.28


Quantity:  





BFW40E Proxxon Mill/Drill - COMPLETE SYSTEM  (Ref: 718225)

BFW40E Proxxon Mill/Drill - COMPLETE SYSTEM

Very high accuracy and vibration free running
Able to carry out horizontal drilling or machining
Compound table gives precision work piece control
Superb motor control allows the cutting tool to work effectively
Very versatile, the ultimate machine for model making


The Complete Mill/Drill System is great value. The complete system consists of:
BFW 40/E Mill/Drill Motor and Controller,
BFB 2000 Mill/Drill Stand,
KT 150 Compound Table & Step Clamp Set.


The BFW40/E drill head with its triple bearing spindle giving superb accuracy and vibration free operation. The power controller gives spindle speeds from 900-6000rpm with full torque control. A set of 6, triple slit, hardened collets from 2.3-6mm is supplied.The BFB 2000 Drill Stand has a precision milled dovetail slide which may be tilted through 90 degrees, a fine feed selector, depth gauge and rack and pinion down feed. This stand will take all drills and routers with a 43mm spindle collar.The KT 150 aluminium die cast compound table has a travel of 150mm both ways, graduations of 0.05mm and 3 machined T slots for fastening machine vices and clamps. Suitable for milling, routing or slotting of steel, non-ferrous metals, plastics and wood.The Step Clamp Set is a 2 clamp set which fits the KT 150 table directly and is ideal to hold the work piece securely in place.For precision work this Proxxon Mill Drill kit would be very hard to beat, made in Europe by the most respected name in model making equipment.

471.00 565.20


Quantity:  





Proxxon PF 230 Mill/Drill Head 474062  (Ref: 24104)

Proxxon PF 230 Mill/Drill Head 474062

Set includes column (35 x 400mm), mounting bracket and bolts. The mounting position on the PD230/E is already milled. The lathe's top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots 12 x 6 x 6mm. The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively. The mill/drill head is identical to the micro FF230. Three collets of sizes 6,8 and 10mm are included.

495.55 594.66


Quantity:  





Proxxon Fine Feed for PF 230 Mill 102666  (Ref: 24140)

Proxxon Fine Feed for PF 230 Mill 102666

* Easily installed
* 1 revolution = 1.5mm, travel, 1 division = 0.05mm
* Graduated scale may be reset to zero


Easily installed. The feed may now be used via either the height feed (vertical) or the fine feed in the tilted position. One revolution = 1.5mm spindle travel, one division = 0.05mm. The graduated scale may be reset to zero.

66.86 80.23


Quantity:  





Proxxon Collet Set for PD 230/E 474230  (Ref: 24042)

Proxxon Collet Set for PD 230/E 474230

* For accurate use on round components
* Concentric accuracy better than 0.2mm
* 8 collets: 2.0, 3.0, 4.0, 5.0, 6.0, 8.0 & 10mm
* Supplied in a wooden box with sliding lid


For accurate use on round components. The collets are mounted in the place of the headstock chuck. Eight collets one each, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0 & 10mm are included. Supplied in a wooden box with sliding lid.

171.32 205.58


Quantity:  





Die-cast aluminium compound table KT 150 474334  (Ref: 20150)

Die-cast aluminium compound table KT 150  474334

With precision milled dovetail slides, thus also suitable for metal work. For routing, milling, slotting of steel, non-ferrous metal, plastic and wood. Each slide provided with locking screws. Dovetail fittings/gib strips adjustable to eliminate play. Feed adjustments by means of 2 handwheels with adjustable, graduated dials (one revolution = 2mm, one graduation = 0.05mm). Machined table, 3 T-slots for fastening machine vices and clamping kits. Fence supplied with pre-drilled positioning holes, including 45°, fastening screws and clamp used for routing. Table 200 x 200mm. Maximum travel 150 x 150mm. Overall height 75mm. Weight 4.9kg

147.22 176.66


Quantity:  





Proxxon BFB 2000 Mill/Drill Stand 474364  (Ref: 20000)

Proxxon BFB 2000 Mill/Drill Stand 474364

High strength precision die-cast aluminium Mill/Drill Stand, with precision milled dovetail slides.

Head with precision milled dovetail slide and may be tilted through 90° to give all-round versatility: diagonal drilling, versatile without need of special milling bits, milling diagonal slots. Fine feed selectable, allowing fine head feed for milling. With dial and depth scale. Geared rack and pinion feed for effortless drilling.

45mm diameter drill column, 500mm long.
Approx. 140mm throat (column outside to tool centre).
65mm stroke.
Machined, solid base plate approx. 200 x 200mm.


All drills with standard 43mm spindle collars may be utilised directly:
BOSCH, AEG, FEIN, METABO, KRESS, BLACK & DECKER, SKIL.

167.01 200.41


Quantity:  


Related products:
1. Proxxon BFW 40/E Mill/Drill System - 230V 20165 (Ref: 474330)
2. Die-cast aluminium compound table KT 150 474334 (Ref: 20150)





Proxxon FF 500 CNC Micro Mill 210676  (Ref: 24340)

Proxxon FF 500 CNC Micro Mill 210676

FF 500 with CNC control! Precision and repeat accuracy for individual parts and small series.


* With recirculating ball spindles on all three axis and three powerful
* Stepper motors for driving the milling table and milling head.
* Large traverse paths: X-axis: approx. 310mm, Y-axis: approx.
* 100mm, Z-axis: approx. 220mm.
* Super-stable column with dovetail slideway.
* Including user-friendly software. Runs under WINDOWS®
* Including control unit for connecting to PC or laptop.


Precise work with high repeat accuracy. A wide range of uses for single part and small series production. Machining of steel and non-ferrous metals is possible in all dimensions thanks to CNC control of 3 tool axes. This also applies to larger workpieces.Axes X, Y and Z with recirculating ball spindles (no backlash) and powerful stepper motors. Apart from this, the mechanical construction is almost identical with the MICRO Miller FF 500 available as a manually operated machine. A solid, flat-milled compound table in steel with 3 continuous T slots for size 8 standard T-nuts. The base is constructed in vibration-damping cast steel. A stable column with dovetail slideway. Swivel-mounted milling head with powerful, quiet and free running condenser motor. Poly V-belt drive for 6 spindle speeds. Additional sleeve feed (30mm) using drilling lever with scale ring (1 graduation line = 1mm). This can be clamped using a tommy screw when CNC milling. Cutting tool fixing using a chuck. Complete with CNC control unit, CNC programme software, all connecting cables, 6 , 8 , 10 and 12mm chucks and detailed manual. Quiet, good-looking and multifunctional. For repeat accuracies of up to 0.05mm. A machining centre for milling, drilling and countersinking which has yet to be equalled. Made in Europe!

Technical data:

Power supply

 

220 - 240V / 50/60Hz

Drive

 

condenser motor with 400W

Spindle drive
X-axis

 

Recirculating ball spindle with 4.0mm inclination,
flank diameter 12mm.
Step motor with 2.2A und 1.27Nm dwell moment;
travel distance: approx. 290mm

Spindle drive
Y-axis

   

Recirculating ball spindle with 4.0mm inclination,
flank diameter 12mm.
Step motor with 2.2A and 1.27Nm dwell moment;
travel distance: approx. 100mm

Spindle drive
Z-axis

   

Recirculating ball spindle with 4.0mm inclination,
flank diameter 12mm.
Step motor with 2.2A and 1.27Nm dwell moment;
travel distance: approx. 220mm

6 spindle revolutions

 

180 - 350 - 550 - 800 - 1,300 - 2,500/min
Selectable by placing drive belt.

Control of step motors

 

via CNC control unit (included in scope of delivery)

Software

 

on CD-ROM, installation under Windows 98,
Windows 2000 and Windows XP

Drive connection

 

via RS 232 interface (or: use of a USB adapter), connecting cables to PC included in scope of delivery

Sizes

 

Machine:

work table 370 x 350mm, table 400 x 125mm, total height approx. 780mm

Control unit:

L 450 x W 270 x H 60 mm

Total weight

 

Machine: approx. 50kg / Control unit: approx. 4kg





PROXXON CAD/CAM software for WINDOWS®



Brief description of software and hardware:
The software is harmonized with mechanics, motors and the control unit of the CNC machine, thus offering the optimum performance.

The CNC control unit controls the step motors of the machine. The PC software provides the machine with the geometry information for travel of the tools (via RS 232 interface). This means that the control unit is the interface between software and the mechanics of the machine.

Powerful micro processors and accordingly dimensioned step motors and phases ensure that the motors always provide enough power for any machining processes. Two freely usable output relays in the casing of the control unit provide facilities for control of additional functions, e.g. a working lamp. Including connection cables with suitable plugs and built-in power supply for connection to 220 - 240V.

Simple creation of work piece geometry
The CAD window is displayed when the programme starts. The work piece contour is created in the familiar WINDOWS environment. Numerous auxiliary aids help during programme operation, which supports both coordinate entry (absolute and relative) in addition to mouse use. Read-in of existing files in standard file formats (e.g. .dxf or .hpgl) is possible. Technology information is allocated to every drawing element. This makes, for example, different processing speeds and manual tool replacement possible.

Automatic generation of CAM data
The finished drawing of the tool is converted, by a mouse click, into the instruction set for the machine. So, machining can be started immediately. The instruction set generated in this way is in accordance with DIN/ISO 66025 and can be manually edited and exported. Conversely, the system also permits importing or complete self writing of data sets.

CNC simulation
If requested, the travel distances of the tool are simulated in the graphic window. In this way, faults in the programming can be recognised in time.

Manual work
The handwheels are replaced with the step motors of the CNC machine. Nevertheless, manual machining is possible with the help of cursor buttons, since the step motors can be operated manually.

Software installation
The PC software is supplied on a CD ROM. The problem-free installation is effected automatically under Windows.

3,860.00 4,632.00


Quantity:  


Related products:
1. Proxxon FF 500 MICRO Mill 211074 (Ref: 24320)





Proxxon Dividing Head for MF70 & TBM220 474592  (Ref: 24264)

Proxxon Dividing Head for MF70 & TBM220  474592

* Used to drill off-set holes & to mill off-set slots, rectangles, hex shapes, etc.
* Scale on the housing enables high accuracy divisions
* Chuck with reversible jaws
* Clamps 1.5 - 32mm internal & 12 - 65mm external
* 11 mm bore allows the passage of longer work pieces when used in the horizontal position
* Fixng holes for horizontal & vertical assembly
* Suitable sliding blocks & fixation screws for assembly to MICRO Miller MF 70 & Compound Table KT 70
* Supplied in wooden box with sliding lid


This Dividing Head can be used to drill off-set holes and to mill off-set slots, rectangles, hex shapes, etc. A scale on the housing enables high accuracy divisions. It includes a chuck with reversible jaws, which is able to clamp 1.5 - 32mm internally and 12 - 65mm externally. The 11mm bore allows the passage of longer workpieces when it is used in the horizontal position. It features fixing holes for horizontal & vertical assembly. Suitable for use with the Proxxon MICRO Miller MF 70 and Compound Table KT 70. Size 72 x 64 x 38mm, supplied in wooden box with sliding lid.

77.16 92.59


Quantity:  





Proxxon Tools >  Proxxon Milling Machines



Proxxon Milling Machines - Buy online at www.proxxon-tools.com with FREE mainland UK delivery for all Proxxon Tools





Proxxon Tooling Homepage
checkout
  View Basket
Proxxon UK Delivery
Free UK Delivery