Proxxon Power Tool Accessories


Proxxon Tools >  Proxxon Power Tool Accessories


Proxxon MICROMOT NG 5/E Mains Adaptor 474952  (Ref: 28704)

46.28 55.54

(Ref: 28704) Quantity:

Variable speed control with feedback effect for optimum tool speed and high torque at low speeds. Three polarised sockets for Micromot machines. A pair of sockets for standard banana plugs (4mm diameter) is also supplied. Master switch for turning off the transformer without needing to unplug. Red LED indicates 'ready'. PTC (Positive-Temperature-Coefficient) element prevents overload (and plugged-in tool will not restart automatically). After cooling down, the mains plug should briefly be unplugged to reset the adaptor. With storage holes for tools with 2.35mm and 3mm shafts. Foldable tool rest for the Micromot tool.

DRILL NOT INCLUDED

Input Voltage: 240V
Model: NG 5/E
Output Voltage: 12V

Proxxon MICROMOT NG 2/S Single Speed Mains Adaptor 12V 476059  (Ref: 28706)

(Ref: 28706) Quantity:

The micromot mains adaptor NG2/S is a 240V to 12-18V / 2.0A unit suitable for many of the Proxxon machines. The NORYL casing is heat resistant, which is a necessity for transformer enclosures. The red LED indicates readiness for use and the PTC element (Positive temperature coefficient) prevents overload of the unit. A foldable tool rest provides a secure place for keeping the Micromot tools at the ready. Note: Supplies 2.0A at 16 Volt open circuit and 12 Volt under load.

DRILL NOT INCLUDED

Input Voltage 220 - 240V
Model NG 2/S
Nett Weight 1kg
Output Voltage 12 - 18V

The mains adapters do not include the illustrated mill/drill units.

Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V 475738  (Ref: 28707)

21.35 25.62

(Ref: 28707) Quantity:

The micromot mains adaptor NG2/E is a 230V to 12V unit suitable for many of the Proxxon machines. The NORYL casing is heat resistant, which is a necessity for transformer enclosures. The red LED indicates readiness for use and the PTC element (Positive temperature coefficient) prevents overload of the unit. A foldable tool rest provides a secure place for keeping the Micromot tools at the ready. The mains adaptors do not include the illustrated mill/drill units.

DRILL NOT INCLUDED

Input Voltage 240V
Model NG 2/E
Nett Weight 1kg
Output Voltage 12V

Proxxon FMS 75 Precision Vice 486353  (Ref: 28602)

22.51 27.01

(Ref: 28602) Quantity:

Key Features

Rotates in all directions
75 mm jaws with removable rubber covers
Maximum clamping width 70mm
Strong suction cup attaches to surface, can also be screwed down


Zinc die-casting with ball and socket which rotates in all directions (even downwards). 75mm jaws with protective covers (for delicate workpieces). Jaws also with vertical and horizontal V-slots for clamping round workpieces. The strong suction cup facilitates instantaneous fixing to any smooth, flat surface. May also be screwed down. Max. clamping width 70mm.

Proxxon Router Base 28566  (Ref: 505907)

21.28 25.54

(Ref: 505907) Quantity:

For use with all MICROMOT tools
with 20mm system collar.


Router base OFV

Made of die-cast aluminium. With plane-milled work base.

For slotting, milling grooves and edges, chamfering. With edge guide (max. throat of 150mm), plus interchangeable circle guide. Adjustable depth stop with preselectable travel stroke. Ideal also as drilling guide for round parts using the prism in the work base



Note:
Depicted rotary tool and drilling bit are not included

Proxxon UHZ Universal Holder 475557  (Ref: 28610)

20.87 25.04

(Ref: 28610) Quantity:

Socket & clamp like the precision vice FMZ. The 34mm bore accepts all Proxxon MICROMOT machines, either directlyor via the 20mm reducing bush. The ball joint may be swivelled in all directions. More...

Proxxon FMZ Precision Vice 702052  (Ref: 28608)

22.51 27.01

(Ref: 28608) Quantity:

Quickly and securely clamps to work benches and tabletops up to 60 mm thick. Stands freely or can be fixed down. Rotates in all directions, including flush to the surface. 75 mm jaws with removable rubber covers. Zinc die-cast vice with ball and socket. Jaws also with vertical and horizontal V-slots. Max. clamping width 70mm. Weight 1.6 kg.

Proxxon Tool Holder for Rotary Tools 476259

Proxxon Tool Holder for Rotary Tools 476259  (Ref: 24098)

13.33 16.00

(Ref: 24098) Quantity:

Key Features

For use on lathe machines
Made of steel 30 x 10 x 65mm
Allows mounting of the rotary tool LB/E or IB/E to the tool post of the PD 230/E and PD 400 Lathes
Collar size 20mm
Shank 8 x 10mm for tool holders PD 230/E & PD 400

Diamond Blade for Proxxon KS 230 Saw 702073

Diamond Blade for Proxxon KS 230 Saw 702073  (Ref: 28012)

25.44 30.53

(Ref: 28012) Quantity:


Proxxon 5 Piece HSS Chisel Set 475240  (Ref: 27023)

31.70 38.04

(Ref: 27023) Quantity:

Five piece HSS chisel set. A high quality set with the most frequently used turning tools: gouge, skew, parting tool, beading tool and scraper. Neatly packed in a wooden box. More...

Proxxon Tungsten Carbide Tipped Saw Blade 10T 702074  (Ref: 28016)

9.86 11.83

(Ref: 28016) Quantity:

50mm. 1mm thick, 10 teeth, for cutting hard & soft woods. PC Cards & aluminium.

Proxxon Adaptors for Sharpening Small Drill Bits 475563

Proxxon Adaptors for Sharpening Small Drill Bits 475563  (Ref: 21232)

25.18 30.22

(Ref: 21232) Quantity:

Adapters for sharpening of small drill bits These adapters extend the BSG 220's range to cover 1.5 - 3mm. One each adapter for sizes 1.5 - 1.6 - 2.0 - 2.4 - 2.5 and 3.0mm. Neatly packed in a wooden box with sliding lid.

Proxxon MICROMOT Step Clamp Set 702051

Proxxon MICROMOT Step Clamp Set 702051  (Ref: 24256)

18.34 22.01

(Ref: 24256) Quantity:

The step clamps set is supplied with the KT 70, but can also be ordered separately. Set consists of 2 stepped blocks and clamps, T-slot nuts of the MICROMOT standard (11.5 x 11 x 4mm) and bolts. This set also fits the lathes PD 230/E and PD 400.

Proxxon Independent 4 Jaw Chuck for DB250 Lathe 702056  (Ref: 27024)

24.61 29.53

(Ref: 27024) Quantity:

With individually adjustable jaws. Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from 1.5 - 35mm (inside) and from 14 - 67mm (outside). The DB250 headstock spindle of thread M16 x 1 screws directly into the chuck.

Proxxon Self Centring 3 Jaw Chuck 702057  (Ref: 27026)

41.14 49.37

(Ref: 27026) Quantity:

Three jaw chuck for the lathe DB 250.

Used for concentric clamping. Made from die-cast zinc and offering 1.5 to 32mm and 12 to 65mm when reversing the jaws. The chuck has a M16 x 1 thread for fitting directly to the DB 250 headstock spindle.

Proxxon Drill Chuck for TBM Bench Drill 702061  (Ref: 28122)

8.98 10.78

(Ref: 28122) Quantity:

For drill shank sizes 0.5 to 6.0mm. Max. speed 10,000rpm. Industrial quality with extra high speed accuracy. With 3/8" thread for MICROMOT bench drill TBM 220.

Proxxon MS 4 Machine Vice 486352  (Ref: 28132)

11.66 13.99

(Ref: 28132) Quantity:

The MS 4 Machine Vice is made of die-cast zinc with three machined sides and horizontal & vertical V-slots in the jaws. Jaw width 50mm and height 10mm. Maximum clamping width 34mm.

Proxxon Drill Chuck for DB250 Lathe 702055  (Ref: 27028)

11.24 13.49

(Ref: 27028) Quantity:

Drill chuck with sliding sleeve for the tailstock of the DB 250. Clamps up to 5.0mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.

Proxxon MICROMOT MB 140/S Drill Stand 474982  (Ref: 28606)

39.95 47.94

(Ref: 28606) Quantity:

The 120 x 220mm milled table is fitted with a fence and a scale. The solid column is chrome plated and the headstock is of die-cast aluminium, offering a throat capacity of 140mm and 30mm travel. A chromed feed lever operates via a drive disc and ball-bearing system, offering a sensitive feed set-up. T-bars allow simple height adjustment as well as the fixing of the mill drill in the 20mm bore fitting. The mill drill collar, with scale, tilts through 90° in both directions. The drill stand features a depth stop as well as drilled, tapped holes for securing the KT 70 Compound Table. The MS 4 Machine Vice can also be fitted, it is made of die-cast zinc with three machined sides and horizontal and vertical V-slots in the jaws. Jaw width 50mm and height 10mm. Maximum clamping width 34mm.
Drill & vice pictured are optional extras


Related products:

1. Proxxon MS 4 Machine Vice 486352 (Ref: 28132)

Proxxon MICROMOT MB 200 Drill Stand 28600  (Ref: 502021)

57.76 69.31

(Ref: 502021) Quantity:

The MICROMOT MB 200 drill stand is made from diecast aluminium and has a head which can be tilted through 90° allowing for diagonal drilling. It has a standard 20mm collar for MICROMOT drilling and milling machines. The solid, hard chromium plated steel column measures 280 x 20mm and gives a throat capacity of 140mm. The table measures 220 x 120mm and has all holes pre-drilled and tapped to accept the KT 70 compound table. Weight 2.2kg.

Proxxon Solid Carbide Saw Blade 702072

Proxxon Solid Carbide Saw Blade 702072  (Ref: 28011)

29.52 35.42

(Ref: 28011) Quantity:

50mm diameter (10mm bore) 0.5mm thick. Fine toothed: ideal for cutting fibreglass sheets up to 3mm, non-ferrous metals, duro-plastics and other 'difficult' materials.

Proxxon Spiral Toothed Fretsaw Blades (12 blades)

Proxxon Spiral Toothed Fretsaw Blades (12 blades)  (Ref: 28746.)

3.79 4.55

(Ref: 28746.) Quantity:

For cutting soft and hard woods, plastics, Perspex, soft non-ferrous metals. (6 blades)
125 mm long without pins (plain ends)

These blades cut in all directions



Proxxon Spiral Toothed Fretsaw Blades

Proxxon Spiral Toothed Fretsaw Blades  (Ref: 28746)

2.46 2.95


These blades cut all directions and obviate the turning of the workpiece (advantageous, especially with bigger workpieces). A 1.5mm hole is required. Ideal for plastic, hard and soft woods.

Proxxon Corundum Disc for KGS80 702067

Proxxon Corundum Disc for KGS80 702067  (Ref: 28729)

2.31 2.77

(Ref: 28729) Quantity:

Cutting disc with reinforcement 80 x 1.0 x 10mm Corundum compound, used for cutting steel, non-ferrous metal, plastic & wood.

Proxxon PRIMUS Vice - 75mm 475090  (Ref: 20392)

44.30 53.16

(Ref: 20392) Quantity:

* Multipurpose Vices feature exact feed
* For industry and demanding hobbists
* Interchangeable hardened jaws, slotted vertically and horizontally
* Both jaws are slotted at the top for gripping flat work pieces
* Solid, cast iron base with CNC machined ways
* Feed screw features a rolled thread for ease of movement

* PRIMUS 75: 75mm jaw width, 65mm opening


Multipurpose Vices "PRIMUS" feature exact feed, ease of operation and accuracy. These vices are suitable for industry or the demanding home users. Fitted with interchangeable hardened jaws, slotted both vertically and horizontally, so either round or odd shaped objects may be clamped. Both jaws are slotted at the top, facilitating gripping of flat work pieces. The solid, cast iron base has CNC machined ways. The relatively high weight may allow use of the vice without fastening it down. The feed screw features a rolled thread which ensures ease of movement even with high axial loads.




Related products:

1. Proxxon Kit for fixing Vices Proxxon Kit for fixing Vices 702071 (Ref: 20394)

Proxxon PRIMUS Vice - 100 mm 474867  (Ref: 20402)

58.16 69.79

(Ref: 20402) Quantity:

* Multipurpose Vices feature exact feed
* For industry and demanding hobbists
* Interchangeable hardened jaws, slotted vertically and horizontally
* Both jaws are slotted at the top for gripping flat work pieces
* Solid, cast iron base with CNC machined ways
* Feed screw features a rolled thread for ease of movement



Multipurpose Vices "PRIMUS" feature exact feed, ease of operation and accuracy. These vices are suitable for industry or the demanding home users. Fitted with interchangeable hardened jaws, slotted both vertically and horizontally, so either round or odd shaped objects may be clamped. Both jaws are slotted at the top, facilitating gripping of flat work pieces. The solid, cast iron base has CNC machined ways. The relatively high weight may allow use of the vice without fastening it down. The feed screw features a rolled thread which ensures ease of movement even with high axial loads.




Related products:

1. Proxxon Kit for fixing Vices Proxxon Kit for fixing Vices 702071 (Ref: 20394)

Proxxon Kit for fixing Vices Proxxon Kit for fixing Vices 702071  (Ref: 20394)

8.15 9.78

(Ref: 20394) Quantity:

T-nut set for PRIMUS vices. 2 T-nuts, screws and the necessary accessories. For fixing to the drill tables of: BFB 2000, KT 150 and drill press TBH.

Proxxon Dividing Head for MF70 & TBM220 474592  (Ref: 24264)

77.16 92.59

(Ref: 24264) Quantity:

* Used to drill off-set holes & to mill off-set slots, rectangles, hex shapes, etc.
* Scale on the housing enables high accuracy divisions
* Chuck with reversible jaws
* Clamps 1.5 - 32mm internal & 12 - 65mm external
* 11 mm bore allows the passage of longer work pieces when used in the horizontal position
* Fixng holes for horizontal & vertical assembly
* Suitable sliding blocks & fixation screws for assembly to MICRO Miller MF 70 & Compound Table KT 70
* Supplied in wooden box with sliding lid


This Dividing Head can be used to drill off-set holes and to mill off-set slots, rectangles, hex shapes, etc. A scale on the housing enables high accuracy divisions. It includes a chuck with reversible jaws, which is able to clamp 1.5 - 32mm internally and 12 - 65mm externally. The 11mm bore allows the passage of longer workpieces when it is used in the horizontal position. It features fixing holes for horizontal & vertical assembly. Suitable for use with the Proxxon MICRO Miller MF 70 and Compound Table KT 70. Size 72 x 64 x 38mm, supplied in wooden box with sliding lid.

Proxxon MICROMOT Protective Cover 950541  (Ref: 28944)

4.56 5.47

(Ref: 28944) Quantity:

A protective cover for hand held MICROMOT tools with a 20mm collar. Protects the user when using saw blades, grinding and polishing tools or when using a steel wire brush. Maximum tool diameter 22mm. Clamps with a thumb wheel.

MICROMOT Flexishaft 110/P 300150

MICROMOT Flexishaft 110/P 300150  (Ref: 28620.)

25.86 31.03

(Ref: 28620.) Quantity:

Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine. Highly flexible core (does not run hot when working with tight radii). Length 100cm. For a maximum of 25,000rpm. Includes 6 steel collets (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm).

A truly flexible shaft some 1 metre long with delicate hand piece complete with six steel collets (ranging from 1mm to 3.2mm) for accurate holding of rotary tools and collet nut. Suitable for use with any of the Proxxon range of tools or indeed any type of power source that can grip the 3mm male shaft of the unit.

Rasp plate with metal burrs made from wolfram carbide for LWS 702041  (Ref: 29050)

30.34 36.41

(Ref: 29050) Quantity:

Rasp plate with metal burrs made from wolfram carbide for LWS

For model-making, cleaning and smoothing of wood, plastics and glass-fibre reinforced objects. No expenditure of effort is needed, easy and precise handling. Not suitable for metal processing.

Proxxon Micromot Flexishaft 110/BF 211025  (Ref: 28622)

25.86 31.03

(Ref: 28622) Quantity:

Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine. Highly flexible core (does not run hot when working with tight radii). Length 100cm. For a maximum of 25,000rpm. Includes 0.3-3.2 mm quick action chuck. Practical when working with different shaft diameters.

A truly flexible shaft some 1 metre long with delicate hand piece complete with chuck for accurate holding of rotary tools a. Suitable for use with any of the Proxxon range of tools or indeed any type of power source that can grip the 3mm male shaft of the unit.



Related products:

1. Proxxon UHZ Universal Holder 475557 (Ref: 28610)

12 Pack 80 G Corundum sanding discs for for Proxxon Long Neck Angle Grinder LWS 702030  (Ref: 28549)

3.56 4.27

(Ref: 28549) Quantity:

Corundum sanding discs for LWS.
Self-adhesive type, used on flat and convex surfaces. Ø 50 mm.

12 Pack 120 g Corundum sanding discs for for Proxxon Long Neck Angle Grinder LWS 702030  (Ref: 28550)

3.56 4.27

(Ref: 28550) Quantity:

Corundum sanding discs for LWS.
Self-adhesive type, used on flat and convex surfaces. Ø 50 mm.

Pack of 5 Sanding Fleece Medium for Proxxon LWS Grinder 702033  (Ref: 28554)

5.39 6.47

(Ref: 28554) Quantity:


Backing disc for for Proxxon Long Neck Angle Grinder LWS 702028  (Ref: 28548)

4.14 4.97

(Ref: 28548) Quantity:

Self-adhesive type, for use with corundum bound sanding discs and sanding fleece. Ø 50mm.

Corundum fan sanders for for Proxxon Long Neck Angle Grinder LWS - 100 grit 702038  (Ref: 28590)

4.18 5.02

(Ref: 28590) Quantity:

Corundum fan sanders for LWS Long Neck Angle Grinders

For grinding tempered cast iron, cast iron, stainless steel, non-ferrous metals, wood and plastic. Low wear-resistant. Ø 50mm.

Silicon carbide grinding disc for for Proxxon Long Neck Angle Grinder LWS - 60 grit 702037  (Ref: 28587)

2.72 3.26

(Ref: 28587) Quantity:

Silicon carbide grinding disc for LWS Long Neck Angle Grinder

Used on hard materials such as glass, stone, ceramics and even hardened steel. Ø 50mm.

Corundum grinding discs for for Proxxon Long Neck Angle Grinder LWS - 60 grit 702035  (Ref: 28585)

2.72 3.26

(Ref: 28585) Quantity:

Corundum grinding discs for LWS Long Neck Angle Grinder

Used for de-burring, grinding, sharpening and de-rusting steel and non-ferrous metals. Ø 50mm.

Proxxon Footswitch FS 476112  (Ref: 28700)

14.99 17.99

(Ref: 28700) Quantity:

For hands free precision work
Connects to all machines with Euro plug, class 2 insulation
Maximum power tool rating 500W
Ideal for portable and stationary machines


For hands free precision work and easy operation.The FS connects to all machines with a Euro plug, class 2 insulation and maximum power consumption of 500W. It is ideal for both portable and stationary machines. The housing is made from fibreglass reinforced NYLON. The mains (240V) cable is 2,500mm in length and the output cable is 500mm long. When using 12V MICROMOT tools the transformer is connected to the footswitch.



Proxxon Tools >  Proxxon Power Tool Accessories



Proxxon Power Tool Accessories - Buy online at www.proxxon-tools.com with FREE mainland UK delivery for all Proxxon Tools





Proxxon Tooling Homepage
checkout
  View Basket
Proxxon UK Delivery
Free UK Delivery