Proxxon Tooling Homepage
 



Proxxon Package Deals


Proxxon Tools >  Proxxon Package Deals



Proxxon STS 12/E Jigsaw 12V & NG 2/E Mains Adaptor - PACKAGE DEAL  (Ref: 717675)

Proxxon STS 12/E Jigsaw 12V & NG 2/E Mains Adaptor - PACKAGE DEAL

Key Features
Proxxon STS 12/E Jigsaw 12V

Powerful 5-pole motor operates
6mm stroke
Variable speed 2,000 to 5,000/min.
Supplied with two blades 1 coarse & 1 fine
Proxxon MICROMOT NG 2/E Mains Adaptor

Proxxon reliability
Tough heat resistant NORYL casing
Foldable rest for Micromot tools

Package deal comprises the Proxxon STS 12/E Jigsaw 12V and the Proxxon MICROMOT NG 2/E Mains Adaptor.

Proxxon STS 12/E Jigsaw 12VIdeal for curved cuts in wood (up to 10mm), corrugated boards (up to 3mm) and non-ferrous metals (up to 2.5mm). Equipped with a powerful 12-18 Volt 5-pole motor. Power consumption 100W, max. 6mm stroke. The number of strokes may be adjusted between 2,000 and 5,000 per minute. Stable housing of fibreglass reinforced polyamide. Includes two saw blades (coarse and fine).We recommend MICROMOT mains adaptor from 2.0A for powering the jigsaw.

Proxxon MICROMOT NG 2/E Mains AdaptorThe mains adaptor NG 2/E is a 230V to 12V unit suitable for many of the Proxxon machines. The NORYL casing is heat resistant, which is a necessity for transformer enclosures. The red LED indicates readiness for use and the PTC element (Positive Temperature Coefficient) prevents overload of the unit. A foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.

62.51 75.01


Quantity:  






Proxxon 50/E Drill/Grinder & NG 2/E Mains Adaptor - PACKAGE DEAL  (Ref: 717677)

Proxxon 50/E Drill/Grinder & NG 2/E Mains Adaptor - PACKAGE DEAL

Key Features
Proxxon MICROMOT 50/E Drill/Grinder

Slim, easily handled & light weight (230g)
Variable speed with feedback
Special balanced, low noise DC motor
MICROMOT 12V transformers of at least 1A are recommended
Supplied with 6 Collets
Proxxon MICROMOT NG 2/E Mains Adaptor

Proxxon reliability
Tough heat resistant NORYL casing
Foldable rest for Micromot tools

Package deal comprises the Proxxon MICROMOT 50/E Drill/Grinder and the Proxxon MICROMOT NG 2/E Mains Adaptor.

Proxxon MICROMOT 50/E Drill/GrinderThe thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds. Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm are supplied. Power consumption is 40W, max. length 220mm and weight approximately. 230g.The body diameter of only 35 mm makes it easy to handle. The weight is only 230g. The quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12V drive system, use of a transformer is required. MICROMOT transformers of at least 1.0A are recommended.

Proxxon MICROMOT NG 2/E Mains AdaptorThe mains adaptor NG 2/E is a 230V to 12V unit suitable for many of the Proxxon machines. The NORYL casing is heat resistant, which is a necessity for transformer enclosures. The red LED indicates readiness for use and the PTC element (Positive Temperature Coefficient) prevents overload of the unit. A foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.

49.83 59.80


Quantity:  






Proxxon 50 Drill/Grinder 12V & NG 2/E Mains Adaptor - PACKAGE DEAL  (Ref: 717678)

Proxxon 50 Drill/Grinder 12V & NG 2/E Mains Adaptor - PACKAGE DEAL

Key Features
Proxxon MICROMOT 50 Drill/Grinder 12V

Slim, easily handled & light weight (230g)
Quick-action chuck
20,000rpm
Special balanced, low noise DC motor
12V MICROMOT transformers of at least 1A are recommended
Proxxon MICROMOT NG 2/E Mains Adaptor

Proxxon reliability
Tough heat resistant NORYL casing
Foldable rest for Micromot tools

Package deal comprises the Proxxon MICROMOT 50 Drill/Grinder 12V and the Proxxon MICROMOT NG 2/E Mains Adaptor.

Proxxon MICROMOT 50 Drill/Grinder 12VA single speed machine 20,000rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds. Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm are supplied. Power consumption is 40W, max. length 220mm and weight approx. 230g. The body diameter of only 35 mm makes it easy to handle. The weight of 230g. The quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12V drive system, use of a transformer is required. 12V MICROMOT transformers of at least 1A are recommended.

45.88 55.06


Quantity:  






Proxxon 12/E Hot Wire Cutter 12V & NG 2/E Mains Adaptor - PACKAGE DEAL  (Ref: 717679)

Proxxon 12/E Hot Wire Cutter 12V & NG 2/E Mains Adaptor - PACKAGE DEAL

Key Features
Proxxon THERMOCUT 12/E Hot Wire Cutting Device 12V

Cutting wires (200 x 0.85mm) can be deformed for the manufacture of any profile by hand or pliers
Pivoted fixing element at top
Extendable wire fixing for maximum extension of 200mm.
Cutting temperature infinitely variable
Polarity-protected system plug
We recommend MICROMOT mains adaptors with a capacity of 2.0A for operation
Proxxon MICROMOT NG 2/E Mains Adaptor

Proxxon reliability
Tough heat resistant NORYL casing
Foldable rest for Micromot tools

Package deal comprises the Proxxon THERMOCUT 12/E Hot Wire Cutting Device 12V and the Proxxon MICROMOT NG 2/E Mains Adaptor.

Proxxon THERMOCUT 12/E Hot Wire Cutting Device 12VFor free modelling in styrofoam. For the manufacture of any profile.For free cutting in thick styrofoam panels for Diorama model railway construction. For architectural model building, prototype construction, for designers and decorators. For fine work on construction insulation. And of course for classical model building. No "crumbling" as when working with knife and sandpaper!Stable frame with pivoted fixing element and extendable lower wire fixing. This means a maximum extension of 200mm. Workpiece height 150mm. Cutting wire temperature infinitely variable. With a little practice, you can achieve optimum cuts depending on the material density and thickness. This is mostly possible at medium temperatures and without too much pressure. Heat-up time 1 second! Complete with five deformable cutting wires 200 x 0.85mm.Technical data: 12V. 60W. 50/60Hz. Cutting wire temperature is variable between 150° and 350°. We recommend MICROMOT mains adaptors with a capacity of 2.0A for operation.Note: Styrofoam is an inexpensive material, and extremely environmentally friendly compared with all other materials. Can be purchased in specialist shops and DIY centres.

Proxxon MICROMOT NG 2/E Mains AdaptorThe mains adaptor NG 2/E is a 230V to 12V unit suitable for many of the Proxxon machines. The NORYL casing is heat resistant, which is a necessity for transformer enclosures. The red LED indicates readiness for use and the PTC element (Positive Temperature Coefficient) prevents overload of the unit. A foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.

52.21 62.65


Quantity:  






Proxxon FBS12/E Drill/Grinder 12V & NG2/E Mains Adaptor - PACKAGE DEAL  (Ref: 717680)

Proxxon FBS12/E Drill/Grinder 12V & NG2/E Mains Adaptor - PACKAGE DEAL

Key Features
Proxxon FBS 12/E Precision Drill/Grinder 12V

Precision tool for delicate or small jobs
Keyless chuck (capacity 0.3 - 3.2 mm)
Spindle lock for easy bit changing
Recessed spindle head for inserting: MlCROMOT collets
High quality 12 - 18V, 5 pole motor
Fibreglass reinforced POLYAMIDE casing
For use with MICROMOT transformers of at least 2.0A
Proxxon MICROMOT NG 2/E Mains Adaptor

Proxxon reliability
Tough heat resistant NORYL casing
Foldable rest for Micromot tools

Package deal comprises the Proxxon FBS 12/E Precision Drill/Grinder 12V and the Proxxon MICROMOT NG 2/E Mains Adaptor.

Proxxon FBS 12/E Precision Drill/Grinder 12VA great precision tool for delicate or small jobs which you can't do with a standard drill e.g. precision drilling, milling, sanding, polishing, brushing, de-rusting, engraving and cutting. Includes keyless chuck (capacity 0.3 - 3.2 mm). A precision ball bearing minimises spindle side play. Spindle lock button for bit changing removes the need for spanners. Recessed spindle head for inserting MlCROMOT steel collets. Efficient forced ventilation cooling of motor (and electronic components in "E" model). High quality 12-18 Volt, 5 pole motor with variable speed 3,000 to 15,000rpm. Fibreglass reinforced polyamide casing. For use with MICROMOT transformers of at least 2.0A.

Proxxon MICROMOT NG 2/E Mains AdaptorThe mains adaptor NG 2/E is a 230V to 12V unit suitable for many of the Proxxon machines. The NORYL casing is heat resistant, which is a necessity for transformer enclosures. The red LED indicates readiness for use and the PTC element (Positive Temperature Coefficient) prevents overload of the unit. A foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.

55.38 66.46


Quantity:  






Proxxon GG 12 Engraving Tool & NG 2/E Mains Adaptor - PACKAGE DEAL  (Ref: 717681)

Proxxon GG 12 Engraving Tool & NG 2/E Mains Adaptor - PACKAGE DEAL

Key Features
Proxxon GG 12 Engraving Tool

20,000rpm spindle speed
Supplied with a 1.8mm diamond grinding bit with spherical head
Requires Proxxon mains adaptor 12 - 18V
Proxxon MICROMOT NG 2/E Mains Adaptor

Proxxon reliability
Tough heat resistant NORYL casing
Foldable rest for Micromot tools

Package deal comprises the Proxxon GG 12 Engraving Tool and the Proxxon MICROMOT NG 2/E Mains Adaptor.

Proxxon GG 12 Engraving ToolThe GG 12 engraving tool requires a Proxxon mains adaptor 12-18V. It features a 20,000 rpm spindle speed, fitted with ball bearing. It is supplied with a 1.8mm diamond grinding bits with spherical head for engraving & line work.

Proxxon MICROMOT NG 2/E Mains AdaptorThe mains adaptor NG 2/E is a 230V to 12V unit suitable for many of the Proxxon machines. The NORYL casing is heat resistant, which is a necessity for transformer enclosures. The red LED indicates readiness for use and the PTC element (Positive Temperature Coefficient) prevents overload of the unit. A foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.

37.17 44.60


Quantity:  






Proxxon PD 400 Precision Lathe > Proxxon PD 400 Precision Lathe - PACKAGE DEAL  (Ref: 718833)

Proxxon PD 400 Precision Lathe > Proxxon PD 400 Precision Lathe - PACKAGE DEAL

Key Features
Proxxon PD 400 Precision Lathe

Supplied with change gears for thread cutting in 19 steps (0,2 - 3,0mm)
Main switch with emergency stop function and restart protection.
Quality, precision 3 jaw chuck with 100mm capacity.
Powerful capacitor motor with 550W output.
Quick-Change tool post with 2 holders (fitted with adjustable height and stop).
Includes 2MT rotating centre in tailstock
Easy to use hand wheel of aluminium with adjustable scale of steel. 1 division = 0.05mm
Fully enclosed lead screw with Acme thread (12 x 1.5)
Cross-braced cast iron bed with wide, ground slide ways
Hand wheel for quick support change
Switch for clockwise, off and counter-clockwise rotation
Selector for auto feed
Proxxon Splash Guard & Chip Collecting Tray for PD 400

Made from 1.25mm steel plate, powder coated
Slopes on the front and rear make it easy to clean
Seeping through of coolant is impossible
800mm long x 270mm wide x 290mm high
Proxxon 10mm 5 Piece Lathe Tool Sets

1 x roughing, parting, finishing, left and right cutter
Supplied in a wooden box

Package deal comprises the Proxxon PD 400 Precision Lathe, PD 400 Proxxon Splash Guard & Chip Collecting Tray and the Proxxon 10mm 5 Piece Lathe Tool Set

Proxxon PD 400 Precision Lathe

Offers precision and versatility. Complete with 3 jaw chuck, live centre and thread cutting capability.The PD 400 lathe is unequalled in its class. Ideal for straight and cross cuts, taper turning, internal and external thread cutting slotting etc. Usable on materials such as steel, non-ferrous metals (aluminium, brass etc.). Negligible variances even under heavy loads. Ground and hardened beds of ribbed construction for highest precision and stability. The wide range of accessories complements the lathe's functions. The bed is equipped with a milled surface for securing mill/drill head PF 400.Technical Data:Centre distance 400mm, centre height 85mm. The swing over the top slide is 116mm. Solid, ribbed bed is made of quality cast iron with ground and hardened slideways. Oversized spindle with 2 adjustable taper bearings, 3MT taper and 20.5mm bore. Run-out, without chuck, 0.005mm.The precision 3 jaw chuck has a capacity of up to 100mm. Six spindle speeds are provided via belt drive: Level 1: 80 / 330 / 1,400rpm; Level 2: 160 / 660 / 2,800rpm. Powerful, quiet capacitor motor with 550W output. All adjusting wheels fitted with scales that may be zeroed. 1 division = 0.05mm. The auto feed has speed of 0.07 or 0.14mm/rev.An integrated gearbox with change gears provides 19 pitches: 0.2 - 0.25 - 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 - 1.0 - 1.25 - 1.50 - 1.75 - 2.0 - 2.5 - 3.0mm. Imperial threads of 10 - 48 TPI are also possible. A rotating centre 2MT and 10mm 2MT gear chuck are included. Cross slide travel 85mm and topslide 55mm. Swivels through 45° for taper turning. Tailstock with 2MT (short), spindle travel 40mm and a diameter of 24mm. Supplied with scale. Approx. size 900 x 400 x 300mm. Weight approx. 45kg. For cutters of 10 x 10mm.

Proxxon Splash Guard & Chip Collecting Tray for PD 400

Made from 1.25mm steel plate, powder coated. Cooling fluid and chips are collected by the tray. A welded cover protects the lathe motor. Slopes on the front and rear of the tray make it easy to clean. Mounting holes and raised base to secure the PD 400 are pre-drilled. Seeping through of coolant is impossible. Size: 800mm length x 270mm width x 290mm height.

Proxxon 10mm 5 Piece Lathe Tool Sets

8mm set comprises of one each roughing out, parting, finishing cut, left and right cutter. Supplied in a wooden box.

Specification for Proxxon PD 400 Precision Lathe - PACKAGE DEAL:
Centre Height 85 mm
Cross Slide Travel 85 mm
Distance Between Centres 400 mm
Height Over Cross Slide 58 mm
Model PD 400
Nett Weight 45kg
Overall L x W x H 900 x 400 x 300mm
Spindle Bore 20.5 mm
Spindle Speed 80 - 2,800 rpm (6)
Thread Pitch Range 0.2 mm - 3.0 mm / 10 tpi - 48 tpi
Top Slide Travel 55 mm

1,907.00 2,288.40


Quantity:  






Proxxon PS13 Pen Sander 12V DC & NG2/E Mains Adaptor - PACKAGE DEAL  (Ref: 718835.,)

Proxxon PS13 Pen Sander 12V DC & NG2/E Mains Adaptor - PACKAGE DEAL

Key Features
Proxxon PS 13 Pen Sander 12V

Proxxon reliability
Durable DC motor
Tough glass fibre reinforced polyamide casing
Reaches awkward-to-get-at areas
8,000 linear strokes per min (2.5mm stroke length)
Mains adaptor of at least 12 - 18V DC is required, power supplies NG2/E or NG5/E recommended
Proxxon MICROMOT NG 2/E Mains Adaptor

Proxxon reliability
Tough heat resistant NORYL casing
Foldable rest for Micromot tools

Package deal comprises the Proxxon 12V PS 13 Pen Sander and MICROMOT NG 2/E Mains Adaptor

Proxxon PS 13 Pen Sander 12V

The PS 13 Pensander from Proxxon is a great tool for the model maker and miniaturist. It is ideal for working on surfaces in recesses, slots and other awkward to get at areas. The durable special DC motor is housed in a glass fibre reinforced polyamide casing and the unit features a sanding stroke with a linear action, not rotational. Supplied with four sanding arbors with straight shanks and four angled (all different shapes) as well as three sheets of pre-profiled self adhesive sanding pads. The sheets are of grits 180, 240 and 400 with 5 of each shape per sheet.N.B. A mains adaptor of at least 1.0A at 10-18VDC is required. We recommend Proxxon power supplies NG2/E or NG5/E.

Proxxon MICROMOT NG 2/E Mains Adaptor

The micromot mains adaptor NG2/E is a 240V to 12V unit suitable for many of the Proxxon machines. The NORYL casing is heat resistant, which is a necessity for transformer enclosures. The red LED indicates readiness for use and the PTC element (Positive temperature coefficient) prevents overload of the unit. A foldable tool rest provides a secure place for keeping the Micromot tools at the ready. The mains adapters do not include the illustrated mill/drill units.

Specification for Proxxon PS13 Pen Sander 12V DC & NG2/E Mains Adaptor - PACKAGE DEAL:
Model PS 13
Nett Weight 130g
Stroke Rate 8,000 /min

44.29 53.15


Quantity:  






Proxxon Tools >  Proxxon Package Deals



Proxxon Package Deals - Buy online at www.proxxon-tools.com with FREE mainland UK delivery for all Proxxon Tools





Proxxon Tooling Homepage
checkout
  View Basket
Proxxon UK Delivery
Free UK Delivery

Newsletter Subscription