Proxxon Tooling Homepage
 



Proxxon Lathes


Proxxon Tools >  Proxxon Lathes


Proxxon PD250/E Mtalworking Lathe

Proxxon PD250/E Mtalworking Lathe




Proxxon PD 250/E Precision Lathe 24002  (Ref: 507249)

Proxxon PD 250/E Precision Lathe 24002

Key Features

Distance between centres: 250mm
Swing: 70mm
Height over cross slide: 46mm
6 Speeds: 100-3000rpm
Motor power: 150W
Chuck diameter: 70mm
Weight: 12kg

The Proxxon PD250/E metalworking lathe succeeds the very popular PD230/E. It has a distance between centres of 250mm, a swing of 70mm and an impressive 46mm over the slide. It has an automatic feed, thread cutting facilities, headstock chuck, live centre and top slide for taper turning. Equipped with with an electronic speed control with a spindle range of 100-3000rpm, depending on belt ratio. The lathe chuck has a high quality 3-jaw chuck made to DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws is from 2-90mm. Included is a lathe chuck guard with safety shutdown. The lathe has a mounting plate for the PF230 mill/drill head to be fixed to it and a full range of accessories is available.

Specification for Proxxon PD 250/E Precision Lathe:

Distance Between Centres 250mm
Height Over Cross Slide 46mm
Model PD 250/E
Nett Weight 12kg
Power 150W
Speed Range 100 - 3000rpm

PLEASE RING TO CHECK AVAILABILITY

964.92 1,157.90


Quantity:  






Proxxon Centre Turning Attachment for PD 250/E 24014  (Ref: 507252)

Proxxon Centre Turning Attachment for PD 250/E 24014

Key Features

Ideal for turning with highest possible accuracy
Includes two centres, faceplate and drive dog
Supplied in a wooden box with sliding lid

76.45 91.74


Quantity:  






Proxxon Fixed Steady for PD 250/E Lathe 24010  (Ref: 507253)

Proxxon Fixed Steady for PD 250/E Lathe 24010

Key Features

For turning long, slender work
Fits directly to the bed
Used when the tailstock support is inadequate
Maximum diameter 40mm

53.01 63.61


Quantity:  






Proxxon Quick-Change Tool Post for PD 250/E Lathe  (Ref: 507256)

Proxxon Quick-Change Tool Post for PD 250/E Lathe

Key Features

Includes two holders
Provides quick tool changes
Easy height adjustment
Tool size up to 8 x 8mm

76.45 91.74


Quantity:  






Proxxon TA 250 Dividing Attachment for PD250 & FF 230 24044  (Ref: 507258)

Proxxon TA 250 Dividing Attachment for PD250 & FF 230 24044

Key Features

Facilitates the matching of gear teeth and non-concentric patterns
Supplied with two dividing discs (40 and 48 steps)
May be fitted to the lathe's cross slide or to the bed
Supplied in a wooden box

This attachment facilitates the matching of gear teeth and non-concentric patterns. Supplied with two dividing discs (40 and 48 steps), enabling standard divisions of 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 40 and 48. The spindle of the attachment is identical to that of the lathe. The 3 and 4 jaw chucks may therefore be fitted to it as well (the chuck is an optional accessory). May be fitted to the lathe's cross slide or to the bed and can also be fitted to the FF 230. Supplied in a wooden box and lid.

184.05 220.86


Quantity:  






Proxxon PD 400 CNC Lathe 50204  (Ref: 24500)

Proxxon PD 400  CNC Lathe 50204





CNC control of Z-axis and X-axis enables precise turning, facing and longitudinal turning of steel and non-ferrous metal.

Axes drive with powerful step motors and recirculating ball spindles (no backlash). For facing and longitudinal turning, for turning balls, radii and any freely formed contours made of steel and non-ferrous metal. Work piece machining is effected automatically by software and can be reproduced as often as required.

PROXXON CAD/CAM software for WINDOWS®



Brief description of software and hardware:
The software is harmonized with mechanics, motors and the control unit of the CNC machine, thus offering the optimum performance.

The CNC control unit controls the step motors of the machine. The PC software provides the machine with the geometry information for travel of the tools (via RS 232 interface). This means that the control unit is the interface between software and the mechanics of the machine.

Powerful micro processors and accordingly dimensioned step motors and phases ensure that the motors always provide enough power for any machining processes. Two freely usable output relays in the casing of the control unit provide facilities for control of additional functions, e.g. a working lamp. Including connection cables with suitable plugs and built-in power supply for connection to 220 - 240V.

Simple creation of work piece geometry
The CAD window is displayed when the programme starts. The work piece contour is created in the familiar WINDOWS environment. Numerous auxiliary aids help during programme operation, which supports both coordinate entry (absolute and relative) in addition to mouse use. Read-in of existing files in standard file formats (e.g. .dxf or .hpgl) is possible. Technology information is allocated to every drawing element. This makes, for example, different processing speeds and manual tool replacement possible.

Automatic generation of CAM data
The finished drawing of the tool is converted, by a mouse click, into the instruction set for the machine. So, machining can be started immediately. The instruction set generated in this way is in accordance with DIN/ISO 66025 and can be manually edited and exported. Conversely, the system also permits importing or complete self writing of data sets.

Manual work The handwheels are replaced with the step motors of the CNC machine. Nevertheless, manual machining is possible with the help of cursor buttons, since the step motors can be operated manually.

Software installation The PC software is supplied on a CD ROM. The problem-free installation is effected automatically under Windows.



3,223.00 3,867.60


Quantity:  



Related products:
1. Proxxon Thread Cutting Device For PD400 CNC Lathe (Ref: 502024)





Proxxon PD 400 Precision Lathe 474027  (Ref: 24400)

Proxxon PD 400 Precision Lathe 474027



Supplied with change gears for thread cutting in 19 steps (0,2 - 3,0mm)
Main switch with emergency stop function and restart protection.
Quality, precision 3 jaw chuck with 100mm capacity.
Powerful capacitor motor with 550W output.
Quick-Change tool post with 2 holders (fitted with adjustable height and stop).
Includes 2MT rotating centre in tailstock
Easy to use hand wheel of aluminium with adjustable scale of steel. 1 division = 0.05mm
Fully enclosed leadscrew with Acme thread (12 x 1.5)
Cross-braced cast iron bed with wide, ground slide ways
Handwheel for quick support change
Switch for clockwise, off and counter-clockwise rotation
Selector for auto feed


Offers precision and versatility. Complete with 3 jaw chuck, live centre and thread cutting capability.The PD 400 lathe is unequalled in its class. Ideal for straight and cross cuts, taper turning, internal and external thread cutting slotting etc. Usable on materials such as steel, non-ferrous metals (aluminium, brass etc.). Negligible variances even under heavy loads. Ground and hardened beds of ribbed construction for highest precision and stability. The wide range of accessories complements the lathe's functions. The bed is equipped with a milled surface for securing mill/drill head PF 400.Technical Data:Centre distance 400mm, centre height 85mm. The swing over the top slide is 116mm. Solid, ribbed bed is made of quality cast iron with ground and hardened slideways. Oversized spindle with 2 adjustable taper bearings, 3MT taper and 20.5mm bore. Run-out, without chuck, 0.005mm.The precision 3 jaw chuck has a capacity of up to 100mm. Six spindle speeds are provided via belt drive: Level 1: 80 / 330 / 1,400rpm; Level 2: 160 / 660 / 2,800rpm. Powerful, quiet capacitor motor with 550W output. All adjusting wheels fitted with scales that may be zeroed. 1 division = 0.05mm. The auto feed has speed of 0.07 or 0.14mm/rev. An integrated gearbox with change gears provides 19 pitches: 0.2 - 0.25 - 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 - 1.0 - 1.25 - 1.50 - 1.75 - 2.0 - 2.5 - 3.0mm. Imperial threads of 10 - 48 TPI are also possible. A rotating centre 2MT and 10mm 2MT gear chuck are included. Cross slide travel 85mm and topslide 55mm. Swivels through 45° for taper turning. Tailstock with 2MT (short), spindle travel 40mm and a diameter of 24mm. Supplied with scale. Approx. size 900 x 400 x 300mm. Weight approx. 45kg. For cutters of 10 x 10mm.

Specification for Proxxon PD 400 Precision Lathe:
Centre Height: 85mm
Cross Slide Travel: 85mm
Distance Between Centres: 400mm
Height Over Cross Slide: 58mm
Model: PD 400
Nett Weight 45kg
Overall: L x W x H 900 x 400 x 300mm
Power: 550W
Spindle Bore: 20.5mm
Spindle Speed: (6) 80 - 2,800rpm
Taper Headstock: 3MT
Taper Tailstock 2MT
Thread Pitch Range: 0.2 - 3.0mm (10 - 48tpi)
Top Slide Travel: 55mm

1,976.00 2,371.20


Quantity:  



Related products:
1. Proxxon PD 400 CNC Lathe 50204 (Ref: 24500)
2. Proxxon Splash Guard & Chip Collecting Tray for PD 400 Lathe 24402 (Ref: 474357)
3. Proxxon Fixed Steady for PD 400 Lathe 24404 (Ref: 474790)
4. Proxxon Travelling Steady for PD 400 24406 (Ref: 474923)
5. Proxxon 4 Jaw Independent Chuck for PD400 Lathe 24410 (Ref: 474232)
6. Proxxon Centre Turning Attachment for PD 400 Lathe 24414 (Ref: 474706)
7. Proxxon Individual Quick-Change Holder for PD 400 Lathe 24416 (Ref: 476211)
8. Proxxon Parting Tool Holder for PD 400 Quick-change Tool Post 24417 (Ref: 475316)
9. Proxxon Collet Set for PD 400 Lathe 24419 (Ref: 474129)





Proxxon FD 150/E Lathe 24150  (Ref: 502015)

Proxxon FD 150/E Lathe 24150

Key Features

Accurate bed made from cast aluminium
Spindle made from diecast aluminium
Speed range of 500-5000rpm
Headstock suibtable to take ER11 collets
Tailstock has a MK0/short bore
Quick change tool post for 6mm tooling


The Proxxon FD150/E is a compact metal working lathe for facing and longitudinal turning, boring, taper turning, parting and drilling. The high maximum speed (5000rpm) allows very small diameters to be machined. The lathe has an accurate bed made from cast aluminium and the spindle from diecast aluminium. It is run using a powerful, quiet running DC motor which has a two stage belt drive used in conjunction with an electronic speed control to achieve the full speed range (500-5000rpm). The main spindle runs with precision bearings and has a continuous bore of 8.5mm. A three jaw self-centring chuck is supplied with an inside jaw range of 1.5-32mm and 12-65mm outside. The tailstock comes with a live centre and has an MK0/short bore. There is a quick change tool post with the machine accepting 6mm tooling.

Specification for Proxxon FD 150/E Lathe:
Cross Slide Travel (X) 40mm, (Z) 60mm
Distance Between Centres 150mm
Height Over Cross Slide 33mm
Model FD 150/E
Nett Weight 4.5kg
Overall L x W x H 360 x 150 x 150mm
Speed Range 500 - 5000rpm
Spindle Bore 8.5mm
Spindle Speed MK0/short bore

423.88 508.66


Quantity:  



Related products:
1. Proxxon ROHM Drill Chuck For FD 150/E Lathe (Ref: 502017)
2. Proxxon ER 11 Collet Set for FD150/E Lathe 24154 (Ref: 502018)
3. Proxxon 6 Piece Cutting Tool Set for FD150/E Lathe (Ref: 502016)





Proxxon 6 Piece Cutting Tool Set for FD150/E Lathe  (Ref: 502016)

Proxxon 6 Piece Cutting Tool Set for FD150/E Lathe

Key Features

Made of high quality cobalt HSS steel
For use with the FD 150/E Proxxon Lathe
One each of boring, roughing out, parting, finishing, right and left cutter
Supplied in wooden box

66.92 80.30


Quantity:  






Proxxon ROHM Drill Chuck For FD 150/E Lathe  (Ref: 502017)

Proxxon ROHM Drill Chuck For FD 150/E Lathe

Key Features

For the tailstock of the Proxxon FD 150/E lathe
Industrial quality with high speed accuracy approved up to 10,000rpm
B 10 x MK 0/short arbo

20.30 24.36


Quantity:  






Proxxon ER 11 Collet Set for FD150/E Lathe 24154  (Ref: 502018)

Proxxon ER 11 Collet Set for FD150/E Lathe 24154

Key Features

Set includes 2.0, 2.5, 3.0, 4.0, 5.0, 6.0 and 7.0mm
Each collet can be reduced to 0.5mm under the nominal diameter
Clamping nut included
Suitable for the main spindle of the FD 150/E
Supplied in a wooden bo

78.65 94.38


Quantity:  






Proxxon Tools >  Proxxon Lathes



Proxxon Lathes - Buy online at www.proxxon-tools.com with FREE mainland UK delivery for all Proxxon Tools





Proxxon Tooling Homepage
checkout
  View Basket
Proxxon UK Delivery
Free UK Delivery