Proxxon Saws

Proxxon DS 460 Scroll Saw 950536  (Ref: 27094)

High quality 2 speed fretsaw with many unique features
Magnesium arms for lower vibration and noise
Table slides back for easy blade changing
Fine table tilt adjustment for precise bevel cutting
Patented blade clamps for true blade alignment
Blower nozzle and dust extraction port provided

This is a high quality, two speed fretsaw that has several outstanding design features that make it a pleasure to use. The arms are made from magnesium to reduce the moving weight by 40%, ensuring extremely low vibration and quiet running. They run on precision bearings and are very slender to allow a clear view of the work. The table slides back 80mm to make blade changing easier. It also tilts between -5° and +50° with five position stops, and has a fine adjustment system to control the table tilt. Patented blade clamps ensure true blade alignment and the saw can use both pinned and pinless blades. The large throat of 460mm is coupled with a cutting depth of up to 60mm in wood or 10-15mm in non-ferrous metals. It also easily cuts Plexiglas, GRP, foam, rubber, leather or cork. A rigid cast iron base ensures stability whilst the die cast alloy table is finely machined for flatness. A 205W brushless motor is powerful and controlled electronically to provide even running whilst under load. An adjustable chip blower and built in extraction connector allow clean working. Supplied with 5 coarse and fine saw blades.

Specification for Proxxon DS 460 2 Speed Fretsaw:
Cuts per Minute: 900/1,400
Max Depth of Cut: 60mm
Model: DS 460
Nett Weight: 20kg
Power: 205W
Table Size: 400 x 250mm
Table Tilt: -5° to +50°

Proxxon DSH 2 Speed Fretsaw - 240V 702063  (Ref: 28092)

Supplied with 5 coarse and fine saw blades
Free-swinging saw blade holder for standard and pin less blades
Bellows with adjustable air nozzle
Rotary knob for basic adjustment of saw blade tension
Housing base made of cast steel

A two speed fretsaw and a great a tool for model building and other fine detailed work. Fitted with a saw blade holder that takes both standard and pinless saw blades. The saw arm and the bellows with an adjustable nozzle, provide an unobstructed view of the work. The 2 parallel swinging saw arms, made of die cast aluminium with ball-bearing direct drive, are adjusted by a rotary knob for basic adjustment of saw blade tension. The 360mm x 180mm main table can be tilted for mitre cuts up to 45°. It is powered by a special motor with electronic stroke regulation and constant speed even under load. Supplied with 5 coarse and fine saw blades.

CUTS 990 OR 1500 CUTS PER MINUTE

Specification for Proxxon DSH 2 Speed Fretsaw:
Max Depth of Cut: 50mm
Max Depth of Cut: @ 45deg 25mm
Max Depth of Cut: @ 90deg 50mm
Model: DSH/2
Nett Weight: 20kg
Overall: L x W x H 530 x 270 x 300mm
Power: 205W
Table Size: 360 x 180mm
Table Tilt: 0-45°

Proxxon FET Table Saw - 240v 210576  (Ref: 27070)

For precise cuts with a height-adjustable and tilting saw blade
Milled die-cast aluminium table
Table and drive can be lifted up for easy access for cleaning or blade changing
Micro-adjustable cut length stop for cuts as small as 0.1mm
The sawblade tilts up to 45°
Special DC motor with Optibelt toothed belts
Supplied with 80mm x 24 sawblade
Push stick and zero tolerance POLYCARBONATE table inset
Dust adaptor for connection to a vacuum

A saw designed for precise, straight cuts, with a height adjustable and tilting saw blade, up to 45 degrees. It is made for the fine mechanic, model builder, mould making, toy manufacture, architect, model carpenter and fitter. A variety of optional blades allow it to cut a wide range of materials, such as wood, non-ferrous metals, plastics, Plexiglas, PC-cards, foam and many others. All the load bearing parts and plane-milled table are made of die cast aluminium making the FET saw very stable.The table and drive lift for easy access for cleaning or changing the saw blade. The micro-adjustable, precise cut length stop allows cuts as small as 0.1mm to be made. The sawblade, with can be pivoted by 45°, makes the cutting of double mitres possible when used with the angle stop. The FET is driven by a special DC motor with Optibelt toothed belts connecting it the main ball bearing supported shaft. Standard equipment supplied with the saw includes a 24 tooth hard metal-equipped sawblade 80 x 1.5 x 10mm. A push stick and a non-slotted POLYCARBONATE sawing table inset for tight tolerances between sawblade and table when cutting small parts. The FET has a dust adaptor suitable for connection to a vacuum for dust free working.

Specification for Proxxon FET Table Saw:
Blade Dia/Bore 50 to 80mm/10mm
Blade Tilt: 0° - 45°
Dust Extraction Outlet: Yes
Max Depth of Cut @ 90deg: 22mm
Model: FET
Nett Weight: 6kg
Table Size: 300 x 300mm

Proxxon FET Table Saw & 80mm Saw Blade - PACKAGE DEAL  (Ref: 717740)

This package comprises the Proxxon FET Table Saw and a 80mm T36 TCT Saw Blade.

Proxxon FET Table SawA saw designed for precise, straight cuts, with a height adjustable and tilting saw blade, up to 45°. It is made for the fine mechanic, model builder, mould making, toy manufacture, architect, model carpenter and fitter. A variety of optional blades allow it to cut a wide range of materials, such as wood, non-ferrous metals, plastics, Plexiglas, PC cards, foam and many others. All load bearing parts and plane-milled table are made of die-cast aluminium making the FET saw very stable.The table and drive lift for easy access for cleaning or changing the saw blade. The micro-adjustable, precise cut length stop allows cuts as small as 0.1mm to be made. The saw blade, which can be pivoted by 45°, makes the cutting of double mitres possible when used with the angle stop. The FET is driven by a special DC motor with Optibelt toothed belts connecting it the main ball bearing supported shaft. Standard equipment supplied with the saw includes a 24 tooth hard metal-equipped saw blade 80 x 1.5 x 10mm. A push stick and a non-slotted polycarbonate sawing table inset for tight tolerances between saw blade and table when cutting small parts. The FET has a dust adaptor suitable for connection to a vacuum for dust free working.

Proxxon 80mm T36 TCT Saw BladeTungsten Carbide tipped blade for use on hard wood, soft wood, plastics and aluminium.

Key Features

Proxxon FET Table Saw

For precise cuts with a height-adjustable and tilting saw blade
Table and drive can be lifted up for easy access for cleaning or blade changing
Micro-adjustable cut length stop for cuts as small as 0.1mm
Easily stored away when not in use
Milled die-cast aluminium table
The sawblade tilts up to 45°
Special DC motor with Optibelt toothed belts
Supplied with 80mm x 24 sawblade
Push stick and zero tolerance POLYCARBONATE table inset
Dust adaptor for connection to a vacuum
Proxxon 80mm T36 TCT Saw Blade

TCT blade for hard wood, soft wood, plastics and aluminium
80mm x 36T blade

Proxxon KGS 80 Chop Saw 702066  (Ref: 27160)

Integrated clamping fixture
Base plate can revolve up to 45° L & R
Cuts up to 65mm wide or 25mm round

The lower part of the motor unit and the base plate is made of sturdy die cast aluminium with CNC milled guides. The base plate is surface milled and fitted with an integral vice to ensure work pieces are held firmly and securely for maximum cutting accuracy. The vice cheeks are provided with V-groove (for round parts) and with groove for clamping thin workpieces up to 65 mm wide. The compact, tight and torsion-free design allows clean and safe cutting of workpieces up to 65mm wide and 25mm thick as well as round material up to a max. diameter of 25mm. The base plate, rotates through 45° left and right and is notched 15° steps, the base can also be locked for intermediate angles. The KGS80 is supplied with a carbide tipped saw blade for wood, non-ferrous metals and plastic with 24 teeth ( 80 x 1.6 x 10 mm).

Specification for Proxxon KGS 80 Chop Saw:
Blade Speed: 4,000rpm
Max Depth of Cut: 25mm
Model: KGS80
Nett Weight: 1.5kg
Power: 200 w

Proxxon MBS 240/E Micro-Bandsaw 474198  (Ref: 27172)

Solid, ribbed die-cast aluminium housing
Double ball bearing aluminium pulleys
Sturdy 200 x 200mm machined table with slot for mitre gauge
Table tilts to 45° for accurate mitre sawing
Low noise 240 Volt motor
Electronic speed is control
Standard equipment includes 1,065 x 5.0 x 0.4 mm (14 TPI) band saw blade

The MBS 240/E has a solid, ribbed die-cast aluminium housing and features double ball bearing aluminium pulleys. Its sturdy, machined table with slot for mitre gauge measures a generous 200 x 200mm. The table tilts through 45° for accurate mitre sawing. The machine is powered by a low noise 240 Volt motor (high quality, for quiet, prolonged use) with toothed belt drive. The speed is controlled electronically for exceptionally accurate cutting. A clear table indicates the recommended speed for most materials. The blade size (5.0 x 0.4 mm) is ideal for fine work, allowing cutting of small radii. Standard equipment includes one 1,065 x 5.0 x 0.4 mm (14 TPI) band saw blade.

Blade Length 1,065mm
Blade Speed 120 ~ 250 m/min
Blade Width Min/Max 5mm
Dust Extraction Outlet: Yes
Max Depth of Cut: 85mm
Max Width of Cut: 150mm
Model: MBS 240/E
Nett Weight: 7.5kg
Overall: L x W x H 510 x 432 x 330mm
Table Size: 200 x 200mm
Table Tilt: 0° - 45°

Proxxon STS 12/E Jigsaw 12V 475014  (Ref: 28534)

Ideal for curved cuts in wood (up to 10mm), corrugated boards (up to 3mm) and non-ferrous metals (up to 2.5mm). Equipped with a powerful 12 - 18 Volt five-pole motor. Power consumption 100W, max. 6mm stroke. The number of strokes may be adjusted between 2,000 and 5,000 per minute. Stable housing of fibreglass reinforced POLYAMIDE. Includes two saw blades (coarse and fine). We recommend MICROMOT mains adaptor from 2.0A for powering the jigsaw.

* Powerful 5-pole motor operates
* 6mm stroke
* Variable speed 2,000 to 5,000/min.
* Supplied with two blades 1 coarse & 1 fine.
* Requires a MICROMOT adaptor of a least 2.0 A

Proxxon KG 50 Cut-Off Saw 474572  (Ref: 27150)

Accurately cuts small items of metal, wood and plastic. Table movable through 45°, allowing mitre cuts. Workpieceis fastened tightly and accurately by means of the integrated clamping device. Clamp jaws 27mm wide and maximum workpiece diameter 20mm. Depth of cut to 13mm. A special slot is provided to clamp H0 model tracks. The fence accepts lengths up to 140mm. Five ceramic cutting discs 50 x 1 x 10mm are also included suitable for cutting steel, non-ferrous metals as well as small wooden or plastic rods. Peripheral speed 20 m/sec.